1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

marlin model 39-A golden

Discussion in 'Gunsmithing and Repairs' started by southern hunter, Oct 7, 2012.

  1. southern hunter

    southern hunter New Member

    very hard trigger pull.is there a way to reduce to 2-3 lbs? is there a diagram showing how to do it? it is my squirrel gun and trigger pull creeps and feels like 8-9 lbs.thanks,for any help
  2. rcmodel

    rcmodel Member in memoriam

    It would require stoning the trigger & hammer square with each other and polishing the engagement surfaces with a fine stone.

    Best accomplished with a sear jig, as it is very difficult to maintain the exact angles you need without one.


    I assume you have neither the tools or any experiance doing trigger jobs, or you wouldn't have ask the question.

    So I'd suggest you find a gunsmith to do it.

  3. 45_auto

    45_auto Well-Known Member

    How many times do you have to post about it before you figure out that the answer is "NO" unless you're an experienced gunsmith with the proper tools, in which case you wouldn't be posting about it here.

  4. ApacheCoTodd

    ApacheCoTodd Well-Known Member

    I see it's only his second post and like some, may have lost track of the previous.

    My experience with the both of mine has been that a thorough and proper cleaning went a long way towards improving the nasty triggers on each of them.

Share This Page