MAC1kcf415
Member
- Joined
- Jun 24, 2016
- Messages
- 3
I need help with date of a S&W model 66-2 serial number 7K50XXX. Thanks
A Look Back at the Smith & Wesson Model 66
The Model 66 without a dash came out in 1970; seven years later the Model 66-1 appeared with the gas ring attached to the cylinder rather than the yoke. The year 1982 gave us the Model 66-2 which eliminated pinned barrels and recessed cylinders. In 1986 the Model 66-3 with a new yoke retention system/radius stud package/hammer nose bushing and floating hand came to the marketplace. Eight years later in 1994 the Model 66-4 had a slightly different rear sight leaf, a relocated drilling and taping of the frame for the rear sight, along with optional Hogue grips and a change in the extractor. The Model 66-5 introduced in 1998 brought us a change in frame design: eliminating the cylinder-stop stud, the elimination of serrated tangs, a change to a MIM hammer with a floating firing pin, along with changes in the internal lockwork. The dreaded internal lock—a.k.a. Hillary Hole—was foisted upon us in 2002 yielding the Model 66-6, the Model 66-7 featured a two-piece barrel and more internal lock mechanisms. This year the Model 66-8 was brought to the market.
K Series K Frames (Adjustable Sight Models
K779,163 – K848,781....1968
K848,782 – K946,391....1969
K946,382 – K999,999....1970
1K1 – 1K39,500.........1970
2K1 – 2K22.037.........1970
1K39,501 – 1K999,999...1971
2K22,038 – 2K55,996....1971
3K1 – 3K73,962.........1971
2K55,997 – 2K99,999....1972
3K31,280 – 5K6,616.....1972
4K1 – 4K1,627..........1972
4K1,628 – 4K54,104.....1973
5K6,617 – 5K73,962.....1973
4K54,105 – 4K99,999....1974
5K73,963 – 6K58,917....1974
7K1 – 7K26,043.........1974
7K26,044 – 7K70,577....1975
6K98,918 – 8K20,763....1975
8K20,764 – 9K1.........1975
8K20,000 – 9K100,000...1975
9K1,001 – 9K99,999.....1976
That chart above seems to have been lifted from THR. Here's the thread if someone wants to read more:.
This is a portion of Pilgrim's post on Northeastshooters dot com in 2009 titled, "How to Identify/Date a S&W"
http://www.northeastshooters.com/vbulletin/threads/68254-How-to-Identify-Date-a-S-amp-W
I enjoy Dave Campbell's work for American Rifleman. It is possible, however, that he may have it wrong... I'm going to go stand over there while all this shakes out.