• You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.

What Accuracy Can be Expected from an AR-15?

Status
Not open for further replies.
Your basic off the shelf standard grade Ar will usually do 2 to 4 MOA with ball and it is generally easy to do an upgrade to the trigger ($100 to $300) and get down to 1 to 1.5 MOA. with better ammo.
The higher grade varmint rigs ($1000 to $1200 lower end without glass)
will generally be 1MOA or better.
I don't hunt but it seems to me a coyote at 250 isn't going to know the difference between 1 MOA and 2 MOA .
I would presume shooter skill is going to be the big factor here but AR's are about the easiest gun to shoot.
I would lean towards the 1/9 over the 1/7, The 20" guns are usually easier to shoot ,go with the flatop as they are the way to go for optic mounting and consider a trigger upgrade , I like the simple Rock River National Match trigger .
 
very accurate.

the only rifles ive seen that shoot 4moa that start with "a" end with "k47" not "r15"

ive never owned an ar15 that wouldnt shoot 1"-1 1/4" right out of the box.

my current ar15 is a 16" bushmaster. it shoots better than the colr rifles ive owned, including a 20" match target rifle. and it weighs less than 7lbs.

heres a little thread i did on it here while back with target pics.

http://www.thehighroad.org/showthread.php?p=4907092#post4907092
 
I've only shot my AR twice (Del-Ton mid-length, 1x9 twist, RRA 2-stage trigger), but it is capable of stellar accuracy.

Yesterday I was zeroing the iron sights. It was only at 25 yards, but fired I managed a 5 shot group from the bench that measured between 1/4" and 1/2".

4 of the 5 made one ragged hole, so call it slightly over 1/4" at 25 yards, excluding the one round that was a hair off.

And that was using milsurp M193 ball, which is not known for stellar accuracy, though admittidly at 25 yards it probably doesn't make a huge difference.

jaholder1971 said:
Take out the stock (crappy) triggger and replace with a quality 2 stage trigger and it'll shrink the groups.

Agree 100%. Stock AR triggers are nothing to write home about; even in my limited AR experience I've managed to figure that one out :eek: :D. Though my 2-stage Rock River Arms trigger is most certainly not the best, it is an excellent value and a significant improvement over ARs with stock triggers I've tried. I ordered my rifle as a kit, and the RRA trigger was something like $50 extra - a real no brainer.
 
Actually, I wonder how much accuracy would improve if I just installed a FF handguard and kept the factory barrel?

Based on what I've seen, free-floating a barrel will reduce your groups by about 0.5" at 100yds from a nice, stable position like bench or prone.

At least that is the result I got when I free-floated my 16" Bushmaster HBAR and the same author of the thread I linked above added a free-float to his rifle and did a much more detailed analysis than I did that had the same result.
 
Status
Not open for further replies.
Back
Top