It was a Kershaw Cryo.Do you mind saying what other knife you had in that steel besides the Kershaw Chill?
https://knifeinformer.com/discovering-the-best-knife-steel/. Not sure exactly what to make of those results
is the Ritter blade steel and heat treat superior?
That's an interesting site, but look at https://knifesteelnerds.com/ if you really want to get more definitive info. Larrin has a PhD in metallurgy, and works in the field. He also does some of his own legitimate scientific testing, not the bro science most others engage in. In particular, Larrin disagees with knife informer's assertion that CTS-XHP is highly corrosion resistant - https://knifesteelnerds.com/2019/07/29/xhp-steel-history-and-properties/. XHP is still a really interesting steel though, so don't rule it out if you find a knife you like with that blade steel.https://knifeinformer.com/discovering-the-best-knife-steel/
I found this of interest.
I looking for a modest pocket knife with good edge retention and durability, a 3" blade weighing in at around 3oz should fit the bill.
You do realize that there are widely available steels that have significantly better edge holding than D2, right?If I were wanting max edge holding I'd at least consider something made with D-2.
I did get to check out the Manix, I also looked at the Spyderco Tenacious and liked the blade w/o the finger choil, I wish it was offered with a better steel.The Manix 2 XL is my first choice
Well, the D'Allara 3 is discontinued and on sale if you want something in that size range without a finger choil - https://www.bladehq.com/item--Spyderco-D-Allara-3-Ball-Bearing--50822. Also, I'd avoid buying anything nicer than a value line Spyderco (like the tenacious) through Amazon: The very liberal return policy with any inventory they ship is a widely known entry point for counterfeits.I did get to check out the Manix, I also looked at the Spyderco Tenacious and liked the blade w/o the finger choil, I wish it was offered with a better steel.
With a good heat treat D2 would be better than what I have.If I were wanting max edge holding I'd at least consider something made with D-2
Can't go wrong with a Kershaw Leek.
That's what am after a medium sized folder that is a good slicer and keeps a edge. I have a razor utility knife in my tool belt but it is often dull from trimming drywall, I need something sharp that stays sharp for cardboard and heavy paper I cut hundreds of feet of this stuff.I like the natives, small enough that you forget its in your pocket and has a nice thick blade on it.
That's what am after a medium sized folder that is a good slicer and keeps a edge. I have a razor utility knife in my tool belt but it is often dull from trimming drywall, I need something sharp that stays sharp for cardboard and heavy paper I cut hundreds of feet of this stuff.