Weber
Member
For the last year I have been collection reloading equipment, building my work area, and collecting items.
This past weekend I finally opened the reloading cabinet, and started processing.
I started by building me work area, I set it up just for reloading and building rifles.
Finally opened the cabinet.
Started with sorting some 223/556 brass.
Inspected the brass for things like this.
Into the tumbler to clean them up.
Ran the tumbler for about 2 hours.
Then time to lube the brass.
Let dry for a few then into the case feeder.
Recapped the first piece of brass using the lee universal decapping die.
Made some adjustments to the sizing/trimmer die.
Before
After
This past weekend I finally opened the reloading cabinet, and started processing.
I started by building me work area, I set it up just for reloading and building rifles.
Finally opened the cabinet.
Started with sorting some 223/556 brass.
Inspected the brass for things like this.
Into the tumbler to clean them up.
Ran the tumbler for about 2 hours.
Then time to lube the brass.
Let dry for a few then into the case feeder.
Recapped the first piece of brass using the lee universal decapping die.
Made some adjustments to the sizing/trimmer die.
Before
After