Recent content by BGD

I looked I checked their Websight and doesn't look like they have one for 22 LR. I have polished the chamber to where it will work with Remington and federal ammo. I measured the diameter of the rounds and Winchester is .25 inches and the others are .24 inches. The Winchesters don't fit.

I saw a 22 magnum hone on amazon. do you think that would work for 22 LR as long as you didn't insert it to far? https://www.amazon.com/gp/product/B00DB8D1RW/ref=ox_sc_saved_title_1?smid=ATVPDKIKX0DER&th=1 Thanks!!

That did the trick. Thanks!!

I have a chipmunk 22 LR that the chamber is tight on. if I force a round in the ejector will not pull it out. Is there something I can do to loosen the chamber up. I have tried cleaning it real well to see if there was just a lead buildup. Thanks,

Anyone have load data for 243 Winchester or 243 wssm for the 90 grain eld-x bullet?

Cool thanks. This looks like just what they need to get started.:)

I am going to build 2 300 blackout rifles with my kids. I am thinking about an inexpensive red dot for them under 100. They are going to be used for target practice and deer hunting at 100 yards. I have never used a red dot y and there are so many of them I don't know what to get. Any suggestions?

Second the 243 Winchester and IMR 4350.

Just ordered an Annealeez. Thanks for posting this. Been looking for something like this that is affordable. They are selling a bunch of them. He said it would be 15 to 20 working days before he would have one to ship.

I wonder how difficult it is to neck down a 300 to 270. I have necked up 223 to 243, but not down. Hopefully 270 WSM will be around a while. They are still making rifles chambered for it and I like mine finally after finding a recipe that works well in it. I am still waiting for someone...

I got a message from midway USA that said Winchester discontinued production of 270 WSM brass? That doesn't sound good for us that have rifles chambered in this caliber. Bummer.

Thanks for the benefit of your experiences. It is appreciated. I am glad I did not buy the rifle. If felt good but it didn't look like the barrel was properly bedded. I think I will look at something else. The Montana rifles look good, I have not seen them before. It's hard buying a rifle...

Anyone have any experience with Kimber rifles? I have been looking for one in 308 but when I found one the stock was close to the barrel on the left side. I was afraid the stock would swell and press on the barrel. What are your experience with Kimber rifles? would I have better luck with...

Thanks good to know Goose. I am using the Sierra 100 g GK. Did not have any problems with extracting at 44.5 grains H4831. I started at 42. Primers look ok. I think I will go up .1 at a time to 44.9 just to see. Although 44.5 grains seems to be a good load 2750 fps, same as I am getting with...

I worked up to 44.5 grains with no pressure signs. getting 2745 fps out of an old Remington model 7 with an 18.5 inch factory barrel. I think the twist is 9.5. I was a bit nervous about going over hodgdons max load, but it appears to be ok with the combination I am using. I may inch up to the...