Recent content by Kenny45

No please answer I have learned my lesson. I just won`t ask anymore:)

Thanks for your time and patience to help with my question. You just don`t have to be a smart:cuss: about it. Thanks Kenny

direct me to the other thread and I will look there Thanks

Does anyone ever use Brasso with corn cob?

Thanks for everyones help !!!!

He is not trying to keep it stock . He wants to update it some. It1s very accurate but wants to update the stock and trigger. Thanks for the help Kenny

A hunting buddy of mine has a 7mm Mauser. He loves the gun and says it is very accurate but cant stand the trigger. He says when you pull the trigger its like it has 2 stages and can feel a heavier pull midway. Can someone tell me how to fix this or recommend a new trigger for this gun. He also...

Looking in my reloading books and wanting to work a load with H414 powder. All the books say to just use large rifle primer but my speer book said to use a magnum primer. The loads I`am looking at are for a 22-250 boat tail ballistic tip 55grain bullet. Why would speer be different ? I have been...

Year S/N start S/N end Quantity 1964 700,000 757,180 57,181 1965 757,181 818,500 61,320 1966 818,501 855,860 37,360 1967 855,861 873,694 17,834 1968 G873,695 G929,990 56,296 1969 G929,991 G965,200 35,210 1970 G965,201 G1,000,436 43,236 1971 G1,000,437 G1,041,884 33,448 1972 G1,041,885 G1,088,291...

Thanks for everyones response. I have never used a filler on bottle neck cases. I just seen that article and thought I would ask about it. I use the information in my manuals and don`t do experiments with my loads. The only thing I do is take the perimeter from start to max and adjust my loads...

i was thinking of using it on a 22-250 round . According to M D article he is using toilet paper cut in small squares.He explains to add just enough to keep the powder from moving off the primer, not enough to increase case pressure.

Does anyone use case fillers in their rifle reloads? I was looking at M D Smith reloading pages and he has an article about using fillers in cases to keep the powder back on the primer for more constant firing. Anyone ever try this?

when working up a load I start at .010 and work back.005 at a time. might not be the traditional it`s just the way i do . i have a savage 110 in 270 cal. that shoots its best at .005 off the lands.

Thats what I plan on doing. Slow and easy. That is what I feel is necessary. Thanks again Kenny:)

Thanks every body for the suggestions I will post how it turns out. Thanks Kenny