-
-
rodwha reacted to Outpost75's post in the thread Accurate Molds 43-215C; what makes it so popular? with
Like.
No need for the larger grease groove on the larger bullet. Plainbased designs top out in rifles at about 1350 fps and when above... -
rodwha reacted to Outpost75's post in the thread Accurate Molds 43-215C; what makes it so popular? with Like.
Go to the website http://www.44-40.org and read on the history. Traditional design for the .44-40 by the late John Kort. Accurate to...
-
rodwha reacted to Driftwood Johnson's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
I have done that for years. Black powder fouling is very dry and will soak up moisture out of the air. However if you apply an oil...
-
rodwha replied to the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F)..After my rusty muzzleloader I was instructed to use oil such as Ballistol to soak into the fouling leaving no room for moisture. I...
-
rodwha reacted to gilgsn's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
Hello. It really depends on the finish of the gun. My Colt doesn't have any blueing left. Rust appears almost immediately. I have to...
-
rodwha replied to the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F)..I read stuff like this when I first got started. Granted I was using Pyrodex, but because I had read from several competition shooters...
-
-
rodwha reacted to .38 Special's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
I've pretty much decided that black is superior to smokeless in the .45 Colt, at least in "standard" - as opposed to Blackhawks, etc. -...
-
rodwha reacted to Jim Watson's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
John “Pondoro” Taylor, famous elephant poacher-ivory hunter, devised the Taylor Knock-Out figure of merit to estimate how long an...
-
rodwha reacted to gilgsn's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
:D Well, I'd like to think of myself as part Floridian, having spent more than a couple decades there ;) Gil.
-
rodwha reacted to Jim Watson's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
Might lead you to think that black powder is just about ideal for a service revolver. Not magnums, not pocket pistols, but standard...
-
rodwha replied to the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F)..Tricky, tricky with that Pennsylvania past sir 😆
-
rodwha replied to the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F)..Where did you acquire the PFN? I had thought it not imported as only Europeans speak of it, and that rarely.
-
rodwha reacted to Shanghai McCoy's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
Swiss powder has the reputation of being a high quality powder. At least here in the states.
-
rodwha reacted to gilgsn's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
Well, this was the first time I ever used Swiss, so I haven't developed an opinion on the matter yet... I need to really compare the two...
-
rodwha reacted to Galil5.56's post in the thread .38-40 Test With 3F Swiss & Vectan PFN2 (3F). with Like.
Wonderful results from a very fine revolver and plenty stout. The BP you use seems of very good quality. Thanks for posting.
-
-
Loading…
-
Loading…
-
Loading…
