Nature Boy
Member
- Joined
- Apr 21, 2015
- Messages
- 8,277
Just beauty marks to me.
Ya it may need high rings, if he was local I have the bolt forging jig he could use.Looks like the bolt handle would hit the scope? But the receiver is drilled and tapped for scope bases already?
Not an expert , so i am asking. Does the bolt handle need adjustment?
Yup - could be one of the salt-stock guns but I'd have to look up the number.Sucks about the pitting, common to have pitting from under the wood.
https://www.gunpartscorp.com/products/48140I may hold off and look for something more suitable, or I may make something out of it. I’m wanting something chambered in .35 caliber
I got this action from a friend and he gave me a friends deal ($200)
I’m pretty sure the bolt handle would need to be bent for scope clearance
A classic cartridge for the action and a fine cartridge in general.The other that would be of interest is the 9.3 x 64.
9.3x64 Brenneke is larger and higher pressure than 9.3x62 Mauser and we've already got him Slamfired down to .35 Remington.
9x57, 9.3x57, and 9.5x57 are milder loads if you want to be all Continental about it.