ISO ruger old army re-barreling
- Thread starter wap41
- Start date
- Status
arcticap
Member
You can try Rob Lewis in Ohio 513-897-2852
or
See post #2 of this thread: --->>> https://www.thehighroad.org/index.p...ths-repair-tuning-and-conversion-work.870077/
EDIT:
This is his latest contact info. that I could find on the N-SSA forum from 2012 - 2016:
Rob Lewis
Tri-L Machine
3752 Pioneer Village Rd.
Waynesville, OH 45068
Here is the correct contact number as of 3/21/2016:
937-252-1978
Last edited:
noelf2
Member
Gary Barnes rebarrelled a ROA for me recently. He's hoof hearted in this forum. Excellent gunsmith!!! I highly recommend him for professional gunsmithing. Here's his website:
http://www.cartridgeconversion.com
http://www.cartridgeconversion.com
Talked to him not something he could do But gave me lots of ideas
arcticap
Member
I recently posted excepts by a THR member who described rebarreling his ROA using a .45-70 barrel.
Then he reamed his chambers to .465, and used .466 balls to win some national championships at Friendship.
https://www.thehighroad.org/index.p...d-black-powder-revolver.877967/#post-11704449
Last edited:
I have one of the guns he won a championship at friendship with a 36 cal with his name engraved on it Haven't heard from him in years
arcticap
Member
It's nice to hear that the gun is in good hands.
If you didn't already know Kwhi43 has passed. RIP
No I didn't know that Sorry to hear He was a good guy Always enjoyed dealing with Phil
right number? won't go thru
woodnbow
Member
- Joined
- Feb 19, 2007
- Messages
- 2,092
Sad to hear that... RIP, seemed like a good man, and free with his knowledge.
Very much so I wish I could remember what year he won friendship with the pistol he sold me
Timtoolman
Member
I don’t know if Dave Clements has any barrels
Left over , from when he did his .50 conversion s as he made the bigger barrels , anytime you sent one to him for the upgrade the old parts were his property
Left over , from when he did his .50 conversion s as he made the bigger barrels , anytime you sent one to him for the upgrade the old parts were his property
I am looking for at least a 12" barrel I talked to Dave a year ago and no can do
arcticap
Member
This is his latest contact info. that I could find on the N-SSA forum from 2012 - 2016:
Rob Lewis
Tri-L Machine
3752 Pioneer Village Rd.
Waynesville, OH 45068
Here is the correct contact number as of 3/21/2016:
937-252-1978
- Status
