Dave Markowitz
Member
I was feeling crafty so I made these today. The antler is from a buck I shot last year. The other parts are a length of 3/8" poplar dowel, a short length of 3/8" brass rod, and a .38 Special case with the end turned down. All parts are glued and pinned together with brass pins I cut from brass rod.
The capper was made from a piece of scrap leather. The top right hole is to tie it to my shooting bag. The row of holes all have slits going to the edge of the leather. It's sized for #11 caps.
The capper was made from a piece of scrap leather. The top right hole is to tie it to my shooting bag. The row of holes all have slits going to the edge of the leather. It's sized for #11 caps.