Most accurate .45 autoloader

Status
Not open for further replies.

makarov

Member
Joined
Dec 26, 2002
Messages
336
OK,

What do you think is the most accurate .45 made? I am talking production guns here not super high dollar custom jobs. Lets say under $800. That is still a pretty expensive gun in my opinion, but we should have a ceiling on price for this hypothetical question...
 
Glad you capped the price on this autoloader. The most accurate 45 I've shot was waaaay over the $800 price tag. In the prescribed limit, I would say the most accurate I've shot has been my HK USP 45...surprise surprise :neener: It consistently makes me look good when I shoot it & is relatively easy to do so. I got mine for $600 brand new last year ;)
 
I have limited experience with autoloaders, but it seems that none that I've shot will shoot point on site as revolvers do. They all seem to shoot low.
 
In that price range, I've found the CZ 97B to be the most accurate. The Sig Sauer P220 comes in second. YRMV
 
I have always gotten better results from my Glock 21 than I (or people I've shot with) thought I would, but I don't think it's the most accurate.

Sig P220 has got to be at or near the top.

Not sure what $800 will get you in the 1911 department, but I've shot a couple of Colt Gold Cups that I wouldn't have paid half that for based on their performance. Conversely, I've shot a couple of Charles Daly 1911's that really shocked me, and they retailed for right at $300.

Don't have a lot of trigger time on the HK's, but what I have done/seen is above average (though not really any better than I can do with my G21).

Guess it's mostly a function of you and what you're comfortable with.
 
At that price point, probably a Kimber Classic Target or a SigSauer P220. There is alot of gun-to-gun variation in production pieces, so it is hard to say... some new stock Colt 01991 guns are shooting into under 2" at 25 yards with factory ammo. :eek:
 
I second what Shane said. The CZ97B is a great pistol. It is well-made and has a precision fit with a visually beautiful finish.

If you have hands large enough to control its size and weight, it is as accurate as most limited production guns that cost multiple times more.

It also eats every shape of ammo (fmj-jhp).
 

Attachments

  • cz97b 25 yard target.jpg
    cz97b 25 yard target.jpg
    60.8 KB · Views: 151
For my money, you can't beat a Springfield Loaded. Stainless Steel,super accurate, feeds anything,and cost was $600 NIB last year.
 
HK P9S. It's difficult to outclass a fixed barrel pistol. I would also wonder about the performance of the prototype .45 Lugers from the 1911 trials. Their accuracy really impressed the Army, and all Lugers are very accurate.
 
A good 1911, a base kimber or springfield

American Rifleman tested springfield armory pistols in the Novermber 2001 edition, the Mil-Spec at $500 shot 10 shot 25yard groups of 1.8" from a ransom rest, this was with 2 different commercial loads. It did just as well as the Trophy match pistol that costs almost 3 times as much.

With a little tweeking by a smith and some load development (if you reload) it could probably do under 2" at 50 yards. Thats as good as any production gun out there. They also tested an Ed Brown Kobra ($2000) with the same loads in another issue this year and it shot around 2-3" at 25 yards.

My mil spec purchased this year is just as good as the one they tested.
 
i'd have to go with the fixed barrel of the H&K P9S too...i know that it outshot my Sig 220, which has no trouble trounching my co-workers' glocks
 
Last edited:
Just to put the nails in the coffin, the typical P9S will shoot an inch group at 25 yards from the bench with most ammo.

Am I to understand that some of you have sub-$1000 1911s or CZs that do that?
 
Maximum accuracy for $800.
I would go for a Springfield mil-spec with a match grade bbl installed by reputable gunsmith known for accuracy or bullseye work. Figure $300 for the gunsmithing and $500 for the gun.
Give or take a little on the costs.
 
before we go wandering OT...

i think "production gun... under $800" excludes the "match grade barrel...custom gunsmith"

i've seen (same shooter, same day, same ammo) a ruger 90 hold better groups, out of the box, then a springfield...but a springfield will tune up better
 
My Kimber Stainless II is extremely accurate, very well fitted, and feeds everything I have tried so far, even empty cases. it was $832.00 after tax.
 
My Kimber Series I is the most accurate centerfire pistol I've ever shot, and will give many a .22 target gun a run for its money. I would put it up against any other centerfire gun under $800 and I paid $600 for it.

This doesn't mean that every Kimber will do it -- certainly not every 1911 -- but mine does. Kimber is known for its tight fitting. There are things to complain about with Kimbers (spotty QC, MIM parts if you care, stainless steel under the black oxide), but their frames are superb.
 
If you have hands large enough to control its size and weight, it is as accurate as most limited production guns that cost multiple times more.

The grip, to me, is NOT that big. It's longer than, say, a Glock 21 or USP45, but the grip is also narrower (hence a flush-fitting, non-castrated mag holding only 10 rounds, instead of 12, 13, or 14).

Actually, it's not any longer than a G21, I don't think. G21's have a pretty long grip, from back to front, and with the finger grooves simply do NOT fit my hand. (You know, I once had a Glock fanatic get MAD at me when I told him this, absolutely insisting that the G21 had the same grip diameter as the single-stack 1911, but once again I digress.)

Still, Pick one up before you buy. The slide stop is in perfect place for me the lefty to hit it with my trigger finger, but none of my righty friends can hit it with their right thumbs. *shrug*

It is, though, very accurate for a gun in it's price range (
 
That would have to be a Dan Wesson Patriot 1911 or the pointman Seven. Around $800.00 and worth every penny.:D

Tony Z


PM7_L_C.jpg
 
My most accurate under $800:

1. Kimber Series I Classic Stainless Target. One-holers. Not too reliable though.

2. HK USP45 fullsize. Nearly as accurate as the Kimber.

3. SIGP220ST. With more practice it should outshoot the Kimber soon.
 
With all the fine guns already suggested, people might laugh at the thought of the Ruger P90 being suggested against a fine 1911 or even the Glock 21. However, just in my own experience, I have gotten some 15 yard and 25 yard groups from my P90 that were surprising, if not downright scary. It's accurate! The trigger is not the greatest, and some think the Rugers are homely looking at best, but with a little patience you can get some good groups out of them....at least I can with my P90. I would not say that a typical P90 is "the most accurate .45" but I would say that they can hold their own and do a darned good job.

Good luck on your decision.
 
Most accurate 45 I have/had is my Ruger P-90T. Excellent gun. Best group achieved was .5" offhand, first shot fired double action, at 20 yds, at a nice easy pace. The p-90 will do it's part if you do yours.
 
The best bullseye shooting I have done (other then a .22) is with a 1911 clone, but my Ruger P-90 has performed very respectable, I have shot 1" groups offhand at 50 Feet. It is an all around excellent pistol.

Tony Z




7465276.gif
 
Status
Not open for further replies.
Back
Top