Load request for 9mm using lead plated bullets

Berry Bullet FAQ:
http://www.berrysmfg.com/faq-q9-c1-How_do_I_load_Berrys_Preferred_Plated_Bullets.aspx

I load that bullet with 5.0 Unique seated 1.120" for my sons XD compact, and my S&W 39 and SIG P6.

rc

I use 4.2 of W231 under our 124's

4.3 gr. of HP38/Win231 behind Berry's 124gr. RN. Works for me.

Chuck

I use the 124 gr FP HB in my Glock 19.

HP-38: 4.8gr
Unique: 5.4 gr

Use lead bullet data and you're good to go. They used to say that on their site, but I have not looked in many moons.

6.4 grains of Bluedot @ 1.150".

Walkalong said:

http://www.thehighroad.org/showpost.php?p=6195350&postcount=11

Some good load suggestions so far. HP-38/W-231 is a good choice. I just ordered another 1K of the Berrys 124 Gr HBRN from TJConeveras. It shoots great in 9MM and .38 Super. I shoot it at 1300 FPS in the .38 Super.

Click to expand...

Just a FYI that Powder Valley sells @ $14/1k less than your supplier. Just trying to save you some $$$ there Walkalong.

Bill

BTW, I use the same 124gr HBRN-TP with 4gr of Titegroup seated @ 1.13" with good results out of my CZ's.

shooter_from_show-me said:

Just a FYI that Powder Valley sells @ $14/1k less than your supplier. Just trying to save you some $$$ there Walkalong.

Click to expand...

PV has been out of stock for 124 HBRN-TP bullet (which has been shooting more accurate than my jacketed reference load). TJ Coneveras pricing includes shipping, so if you factor shipping cost for PV, it is $1-$2+ lower per thousand IF they are in stock.

BTW, I use the same 124gr HBRN-TP with 4gr of Titegroup seated @ 1.13" with good results out of my CZ's.

Click to expand...

Yes, Bullseye and Titegroup produced 1"-1.5" shot group at 15 yards off hand for me out of Glock - http://www.thehighroad.org/showthread.php?p=7266869#post7266869