From my understanding what I read on the Dillon web site is that an AT500 works like a Turret Press except you move the shell plate, instead of the toolhead/turret plate and only one shell at a time can be done. I'm wanting another Turret press right now since I'm still a newby to do .357 Mag on and here are a few questions I have if my assumption above is correct.
1. I want to decap on a single stage press and use a hand primer to do my brass like I'm doing currently with .45 . Is the priming arm removable because I want to setup the expander/powder charge die as my first die in the toolhead.
2. Can I use the Lee Dies and Lee Powder Disc thrower with an RCBS lockout dies on this setup.
If I go this route I may later upgrade it,but may not. I was looking at getting the stand with it, the better handle, and the plastic bin and auto eject kit.
1. I want to decap on a single stage press and use a hand primer to do my brass like I'm doing currently with .45 . Is the priming arm removable because I want to setup the expander/powder charge die as my first die in the toolhead.
2. Can I use the Lee Dies and Lee Powder Disc thrower with an RCBS lockout dies on this setup.
If I go this route I may later upgrade it,but may not. I was looking at getting the stand with it, the better handle, and the plastic bin and auto eject kit.