Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I have some 170 gr FP Hornady 308 bullets, I know they should work fine in my 300 Winchester Magnum, but I don't seem to be able to find any load data for them.
A friend asked me, and I'm about 99% sure I know the answer but thought I would get a second opinion. Can you for example use a Lee die in an RCBS press, or an RCBS die in a Lee press, or a Lee die in a Hornady press for that matter. My answer is no but never tied it, and highly doubt these...
When taking apart my HiPoint 45 ACP, I dove the pin to far trough and seem to have caused my self some major issues. Now the magazine doesn't seem to want to go all the way in, and the slide doesn't seem to want to hold back properly. I've been trying to figure out how to fix the issues I caused...
The piston locking lever on my SKS broke off, may have been something I did, or just age. I'm looking for a replacement and wondering how difficult it is to replace it.
Doesn't surprise me. When I ordered mine there was a limit of one per person, and when I went in the line at the gun counter was fairly long. At least around here (and from what I hear other places as well) people have been buying guns like crazy. I know finding gun powder is still somewhat of...
There seem to be a few serial numbers on mine. One on the trigger guard, another on the rear of the dust cover, one on the receiver, and one by the action. The two serial numbers on the rear of the dust cover and the trigger guard are the same. The one on the action is much longer, but ends in...
I learned you can do Nitrate bluing. (IF you can get it hot enough. PS don't try this on an electric stove!) Then I tried kind of my own method of applying cold bluing, heating with a small plumbing propane torch, and quenching. (And repeat) I think it came out ok. Also rubbed with rags a 0000...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.