Search results for query: *

OK, I'm looking for a set of night sights for a Glock 17/22 that leaves very little light on either side of the front sight. I have a current set of Tru-Glo night sights that just leave too much wobble on either side. Maybe my eyes are getting old but too much light makes it hard for me to line...

I hope your suggestion will be something other than Remington. I have a few Savages and they have been great. I also have a CZ and a Howa which have worked very well. I'm even looking at a Sako for purchase later this year. Rem's QC, CS, and overall bad judgement along with all the poorly fit...

I can get Fed brass for $13 locally but .38 SPL costs $22, that's 41% cheaper! I can get aluminum cased or steel cased 9mm for $10, about 55% cheaper. With .38 SPL at such low pressures I can't believe I can't find .38 SPL in aluminum or steel cased ammo. What is wrong with the ammo makers? I...

Already mostly done as far as a scout"ish" Mosin with magazines in 5 and 10 rounds just ad a scout mount, here:http://www.archangelmanufacturing.com/2014/05/14/archangel-opfor-precision-rifle-stock-for-mosin-nagant-m1891-and-variants/ I've been thinking about doing this for awhile. Since this...

I have both. I tell you what I've learned from my time with them. Mini-14: I like the old school M14 look. Accuracy is 1.5 MOA with most of my handloads as I have a newer version with the heavier barrel. After market magazines suck. No, they really really suck. Really. Tapco's mags do okay...

Posted in your other thread but here is better than both:http://www.bravocompanyusa.com/BCM-18-SPR-SS410-Barrel-Rifle-Length-Gas-Ionbond-p/bcm%20ss410%2018-8%20ib%20bk.htm The BCM is a better grade of stainless, I wouldn't put a DPMS/BUSHMASTER/REMINGTON barrel on any rifle I own. They have...

Quality BCGs aren't as expensive as most think, make sure the carrier is 8620 and the bolt is carpenter 158. Just because it's expensive doesn't always mean quality or equal specs. I have a bolt from a place many on here would consider a quality manufacturer, cost $75 for the bolt at the time...

The weight is on the site for the Mark AR MOD 1 1.5-4x20mm. It is listed at the "Features/Specs". Scroll down past "model options", then "downloads", to just under where it says "Leupold Riflescope Owner’s Handbook", just click on specs. Here is the link again...

This is from Nikon's site:http://www.nikonsportoptics.com/en/Nikon-Products/Riflescopes/M-223-2-8x32-BDC-600---------.html it lists it as 15.17 oz. From Leupold's site, click on specs about halfway down the page: http://www.leupold.com/hunting-shooting/scopes/hog-riflescopes/vx-hog-1-4x20mm/ It...

I asked this on another forum but thought it would be nice to get as many answers as possible. This last week or so I've been helping a buddy at work look for an optic and the weights are kind of puzzling to me. We looked at tons of optics from 1-4x to 2-10x in the $200 to $350 range and the...

Pops loves his circuit judge. He got it after us sons got him a judge for his birthday. It is fun to shoot and has little recoil. Everybody who shoots it loves it, and it's plenty accurate to 50 yards. He always smiles when he gets it out, something that he hadn't done much since my brothers...

Almost made a new thread, glad I looked here. My question is: I'm looking to start loading .45 acp, and I'm confused as which is better for both lead and jacketed bullets, the FCD or the Taper Die? Does the FCD work the same way that my .223 crimp die works? How does the Taper Die work? This...

I would be doing this outside, not much to worry about there. I'm looking at heating the part then dipping in oil, not the same as hot salt bluing. I'll be using a torch or even my stove I have in the workshop. The process I'm looking at doing involves heating the part then submerging in an oil...

I was looking at cold blue products when I came across this. I did a search but came up with cold blue and acid based bluing. The cold blue stuff has been reported to not be very wear resistant and I'd rather not screw with acids as I would have to dispose of them. I really liked the look of the...

I'd really like to see what the Herters (CCI) TNJ 115 ball does. Without the metal jacket I wonder what kind of deformation you'd get? I recently picked some up and wonder how they would do for my back-up to my rifle for my pig culling duties on our land. I'll be watching this thread for sure. I...

I have a older Savage stagger feed 110 that I put a new barrel, stock, scope mount, and scope on that had light primer strikes with Russian ammo that looked just like the op's pics. I thought it was bad ammo as it was herters .308. I tried some Federal 7.62x51 and Privi .308 both worked fine...

Armalite has a decent rep but not the best, they are considered OK but slightly overpriced. Bushmaster and DPMS are owned by Freedom Group, looked at as poorly made with inferior materials, and FG tried to sell of both when the craziness started instead of sticking by gun owners. STAY AWAY from...

I'm looking for a set of 30mm rings for my Mini and a few different companies rings look pretty good, I just don't know how high I need for a 1-4 or 1-6 with a 30mm tube. I have the Bushnell AR optics 1-4 PCL and the Primary Arms 1-6x both are so close to the same size that either will work I...

Did you buy a Bushmaster or DPMS? Both are notorious for barrel nuts that aren't tightened to spec. Here is an example: http://www.luckygunner.com/labs/brass-vs-steel-cased-ammo/ From the test . Two out of four is pretty bad, another reason BM and DPMS aren't well thought of. You will need a...

Troy Alpha rail, it was easy to install, lightweight, didn't cost an arm and a leg, and is rock solid. You can install rails anywhere you want too. I'm happier with it than my Midwest SS or my Troy Bravo free float. The Troy rails use the original barrel nut unlike my Midwest. I really like the...