Search results for query: *

  1. R

    .41 mag reload data

    41 Magnum Berry Bullet load For the 210 grain Berry Bullet in 41 mag, I am using 15.5 grains N110 with C.O.L. of 1.580. As per Sierra load manual this provides about 1150 FPS. I am loading them on my Dillon SDB using a slight roll crimp.
  2. R

    Colt 1911 Question

    Series 70 Delta Elite 10MM? Please correct me if I am mistaken, but I do not think that Colt makes or ever has made a Series 70 Delta Elite which was the subject of the conversion. Both the old model Delta and the new model Delta are Colt series 80 pistols.
  3. R

    Colt 1911 Question

    I got a new Delta ELite series 80 MKIV 10mm and this what Kase Reeder of Reeder custom guns said about it: You can take out the series 80 parts in it and replace the ones in the frame with a TJ custom frame filler. It will give you a better action and replace 4 parts in the gun that can break...
  4. R

    02020 XSE Delta Elite reliability work.

    Delta Elite information Yes this is the new model Delta Elite 02020 XSE. If you go to Brownells and look at the schematic for Colt Delta Elite, you will see what parts I removed. Pictures of the new Delta Elite can be found on gunbroker.
  5. R

    02020 XSE Delta Elite reliability work.

    On my New Delta Elite, I installed a full length guide rod with shock buffs and a Wolff 24" recoil spring. The original set up was a plastic, short guide rod, with two recoil springs. I removed the Firing Pin Plunger, Firing Pin Plunger Spring, Plunger Lever and Trigger Bar Lever and...
  6. R

    9X25 Dillon on Glock 20 platform

    9x25 Dillon in Glock 20 I have converted my Glock 20 to 9x25 Dillon by installing a Lone Wolf 9x25 SS barrel and a Sprinco guide rod system. It works fine and has no more kick or noise than the 10MM. Since is is a 10mm necked down to a 9mm, you can use the Glock 20 magazines too. If you are...
  7. R

    Bought a Glock 20 SF today.

    Glock 20 SF I recently got a Glock 20 SF and installed a 6" Lone Wolf 10mm barrel, with a Lightning Strike stainless steel guide rod and spring set from Brownells. Part # 642-105-020 I fired it for the first time three days ago with Double Tap 10 MM 165 grain Golden Saber ammo and it...
  8. R

    most total energy full sized autoloader?

    Glock 20 9x25 Dillon The ultimate high power semi auto is the Glock 20 converted to 9x25 Dillon and a 15+5 round extension. A total of 20 rounds of super 9MM..
  9. R

    bulged/split brass out of my Glock 20?

    Glock 20 big Kaboom (update) The final verdict from Glock: "There was a "squib" load and another round fired behind it that caused the explosion. Our barrels are much harder steel and if our barrel would have been installed when this incident happened it would not have caused a total...
  10. R

    bulged/split brass out of my Glock 20?

    Glock 20 big Kaboom (update) The final verdict from Glock: "There was a "squib" load and another round fired behind it that caused the explosion. Our barrels are much harder steel and if our barrel would have been installed when this incident happened it would not have caused a total...
  11. R

    What is the last gun that you bought?

    My last gun purchase was a Para PX745SD. My first 45 ACP semi auto pistol.
  12. R

    Question about a car gun

    Car guns Living in Alaska the temperatures vary. The gun is cold when I park outside at work. When I park in my heated garage it warms up. The best gun to carry in the car is a Stainless revolver in .357 magnum, 10MM, or 45 ACP. They are all good self defense calibers and the...
  13. R

    bulged/split brass out of my Glock 20?

    Glock 20 big Kaboom Ok folks, I installed a new Storm Lake barrel, Wolff one piece steel guide rod and 20# recoil spring. I shot four 15 round magazines with no problem, using both PMC 200 grain factory ammo and my reloads with 800x and new starline brass. On the fifth magazine, 2nd shot...
  14. R

    Glock Kaboom poll.......... Glock owners please vote

    Glock 20 big Kaboom Hi folks, Today at the range I experienced my first Glock Kaboom. It was a bad one as described in http://www.thegunzone.com/glock/glock-kb-faq.html I will never own another Glock. I love my customized Delta ELite and my Smith & Wesson 610 revolver. Both of which are...
  15. R

    10 MM Dream Gun!

    10MM versus 45 ACP The 10MM is my favorite handgun cartridge. It offers several different bullet weights and loads which exceed 1200 fps muzzle velocity, and with over 600 ft Lbs muzzle energy, it packs quite a punch. If I had to choose between 10MM and 45 Auto for hunting, I would pick the...
  16. R

    Ruger Mark III (22/45)

    Ruger 22/45 Mark III magazine disconnect Gentlemen, Thanks for the advice and yes, once I inserted a magazine the trigger worked just fine. However one of the magazines will not load cartridges. I got one magazine without a button on the side and it works fine. The magazine without the...
  17. R

    Ruger Mark III (22/45)

    Ruger Mark III 22/45 Hunter I just received a brand new Mark III Hunter model and field stripped it to clean everything up. When following the owners manual procedure for reassembly, I managed to finally get it all together. The receiver locks in place when the bolt is pulled back, however...
  18. R

    New Red Hawk Needs trigger job How?

    Dry firing Redhawk You are correct, as it is not due to the transfer bar safety. I have edited my previous message. Thanks for bringing it to my attention. Ruger metal is more beefy than most revolvers made today. For a good review of the new 4" Redhawk go to...
  19. R

    New Red Hawk Needs trigger job How?

    Ask that question to Ruger who says this in their Redhawk owners manual> “Dry Firing” is practicing the trigger pull of the empty revolver for practice and familiarity. The Redhawk revolver can be dry-fired without damage to the firing pin or internal components. Be sure that the revolver...
  20. R

    New Red Hawk Needs trigger job How?

    Redhawk springs I have performed several trigger jobs on Redhawks with good results. Light stone all moving part surfaces with an extra fine stone. Don't change any angles, just polish! Stone the inside of the frame where any moving parts touch. Clean thoroughly. The action will improve...
Back
Top