rmgunsmith
Member
On my New Delta Elite, I installed a full length guide rod with shock buffs and a Wolff 24" recoil spring. The original set up was a plastic, short guide rod, with two recoil springs.
I removed the Firing Pin Plunger, Firing Pin Plunger Spring, Plunger Lever and Trigger Bar Lever and installed a TJ's Custom frame slot filler.
I also added a Wilson Combat slide stop and Stainless barrel link.
The frame stop filler was a chore to line up with the sear, and disconnecter, but it made the pistol more reliable because if any of the above parts were to break your gun would be useless.
IMHO this reliability work is a good idea for any series 80 pistol.
I removed the Firing Pin Plunger, Firing Pin Plunger Spring, Plunger Lever and Trigger Bar Lever and installed a TJ's Custom frame slot filler.
I also added a Wilson Combat slide stop and Stainless barrel link.
The frame stop filler was a chore to line up with the sear, and disconnecter, but it made the pistol more reliable because if any of the above parts were to break your gun would be useless.
IMHO this reliability work is a good idea for any series 80 pistol.