Search results for query: *

Recently picked up a 7 prc cva cascade lrh and am trying to make a decision on a scope for it. Robbed a vortex viper off of another rifle just to see how it shot but am now looking to find a scope that will stay on this gun. Going back and forth between a burris eliminator ( likely a 4 due to...

Looking to get into a 7PRC. The two I'm looking at are the two listed above. Understanding that CVA is equipped with Bergara barrels I'm curious as to any other pros and cons between the two? I'm looking to eventually run a suppressor on it so I'm taking barrel length into consideration as well...

Has anyone had any luck finding 168gr nosler accubon lr? Seems like some places have the 175's. If I can't find the 168 I might have to make the swap. If I do have to change from the 168ablr I was maybe thinking about trying barnes 150ttsx or 145lrx. All of these will be shot out of a 7mm rem...

Thank you folks! Noted, not to carry over from powder to powder 10-4. Anyone use the h4831sc for the 190ablr in the 06? Curious how it worked out

I am wondering if anyone has any experience loading the 190gr ABLR in 30-06 using H4831sc? Using nosler data I see a load with N560. I also see N560 being right next to H4831sc on the burn rate chart. Am I able to mimic the N560 load in grains for the H4831sc?

Thanks a ton guys. Definitely have some good ideas on some other stuff to try. I do have a partial box of 180 accubonds I got at a garage sale a while back I might try and see what happens accuracy wise. As far as hornady goes anyone have better luck with interlock over sst's or vice versa ? I...

I am currently loading 180gr partitions for my 30-06 with reloder 22. Price of partitions has me shopping around for something else. I understand you can't beat a partition design in reliability but I'm curious to hear what people have used reliably for pronghorn up to elk in 180gr. With...

Thanks a ton for the info guys!! Sounds like keeping velocity and range in mind it'll do the trick!

Loading for a .243 and playing around with some bullets. I found some 80gr gmx in my stash and the question isn't if they will shoot but rather are they suitable for whitetail, mule deer, antelope? Or am I better off just to stick with my 95gr and 100gr bullets for them and save the 80gr for...

New to loading for the .243 I want to use 75gr vmax for coyote. I see hornady makes 75gr with their superformance factory loads yet nothing in the load data for that powder. I have some on hand and was hoping to use it. Anyone have experience loading with the 75 vmax with superformance?

No I'm shooting in prone on the ground with the rifle in a lead sled in an attempt to eliminate shooter error and just see what the rifle is doing and what it likes. As far as powders I have H1000, ramshot magnum, and magpro as options. I have most in the H1000 and was hoping it would work for...

Shooting inherited browning 7mm rem mag and having point of impact issues. At 100 yds I was able to put 4 shots in 3in. with Winchester power point 175 gr bullets. Working up a load for this using nosler ABLR in 168gr using federal 215 primers and H1000. Had three test loads at 67 68 and 69 gr...

Has anyone owned a tristar viper max? Looking to get a semi auto budget friendly 12 ga. I currently have the mossberg maverick 88 and looking to get into autoloader. I've checked out the 935 but just seeing what else could be out there. Looking for 3.5 chamber. Read up on the mossberg 935, sx4...

Brand new to reloading shotshells as I just got the lyman 5th edition handbook. Looking into what spent hulls I have in the book to match up load data to gather components. I'm looking to mimmik what I shot for geese which is federal speed shok waterfowl load 3" 1 1/8oz. bb steel shot. Looking...

Thanks everyone, a few things to try. Called lee and have a new clamp nut on the way. They did ask of the pin and expander were all straight. They appear to be straight but I don't know maybe its best to get a replacement shaft too?

Yes they're standing in my tray and sprayed at roughly a 45° angle. Should I spray more down the neck or brush?

Reloading for 30.06 and this is my first time loading for that cartridge or with these dies at all. Using once fired from factory Remington brass. Cleaned and lubed with one shot. Setup Lee full length die from pacesetter set per their instructions. Ran 10 or so cases through with no issue on...

Thanks a lot guys I really appreciate the info and input!! Of course along with the difference in velocity I was most concerned about the POI change that would coincide with it. Guess the only way to find out is to test but then again I may just wait for cooler temps to to do development to stay...

I'm looking to make my first load for 30-06 using 180gr partition. According to nosler data RL22 is their most accurate and that's what I have to load with. My question is how temp sensitive is RL22? I've heard both that it's very sensitive and others say they havent noticed anything. Anyone...

Anyone have experience loading 160gr ftx bullets with h335? Curious about charge weight, bullet seating off the cannelure to get closer to lands and if you still crimped off the cannelure. Reloading for savage model 170