Hello all,
I found a couple of tools in a catch all box I purchased at an auction. They appear to be factory made. The tools were mixed in with some other gunsmithing items. My gut says they could be some sort of shotgun tool. One tool has:
O.F.M. P/N
F-3647
and the other has...
I am looking at a used safe that I cannot find a brand or manufacturer on the safe. There is a BP-1000 badge with a UL TL-15 reference on it and a UL BP-280 badge with relocking device reference. The construction is 1" plate for the body and 1-1/2" plate for the door. I can't tell if it is...
A relative of mine recently purchased a used safe with a S and G lock and no combination. The door was off the safe and the back was accessible. We removed the rear cover on the lock and after a little work, we came up with a combination that seems to work fine. If It was an option I would...
I am wanting to replace the Sargent and Greenleaf lock on gunsafe and I do not know how the dial attaches to the lock through the safe door. Is this something that can be done at home or is strictly for professionals?
Thanks,
I would like to help a friend out who wants to re-arrange the inside of an older RSC. It looks pretty wild right now with the orange shag carpet over particle board. I was thinking about replacing the thick particle board partitions with some thinner plywood to gain a little more volume inside...
I apologize in advance about another rsc question. A co-worker has stumbled upon an older (1970's?) pre-Browning Pro-Steel rsc. It has a 1/4" plate body and a true 3/8" plate door. Sounds like a great rsc, except the 3/8" plate door edge is completely exposed! There was no attempt to recess...
The local store had a new one of these on display and when I looked through it with both eyes open at several game mounts around the store, the actual magnification appeared to be 1X. I have heard that sometimes the actual magnification of optics is rounded up or down to an even number, but...
Is it possible to re-chamber a 38spl GP100 to 357 mag with some reamer work? Are there dimensional, material, and/or heat-treat differences between the 38spl and 357 mag cylinders?
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.