Search results for query: *

Guys I need some help. A buddy of mine has a .300 win mag that accuracy has went south on upon inspecting the rifle it has bad copper fouling. What product or home brewed concoction is best for removing copper fouling

I'm asking this question for a friend who is wanting to lighten the trigger pull on his Super Blackhawk. 44mag. He had heard something about removing the grips and unhooking a spring to lighten the trigger pull. I was some what skeptical of this and told him I would ask you guys about this. Any...

Thanks guys this is my first revolver I have owned only autos before

Its accurate was just wondering if there was a way to tighten it up to squeeze all the accuracy I could out of it

Hey guys just a question is there way to tighten up the cylinder on a blackhawk? Upon lock up my pistol has a small amount of play in it. Any info appreciated.

Guys have any of you had any experience with the eaa witness elite match or the hunter model in 10mm.My dad is looking at getting one for hunting and was curious about accuracy out to 100yds. any info or opinions greatly appreciated

Guys I was displaced from my home for about a year because of a natural disaster my reloading equipment was in storage for around a year now that I am settled in to my new home I was setting up my loading bench and alot of my stuff has rust namely my dies that I am worried about is there any way...

Guys I got a new toy. A savage model 10 in .243 win. the twist rate is 1 in 9.25 and seeing as i didn't have any brass I went down to my local wally world and purchased a couple of boxes off the shelf so I could "make brass" any way I know the rifle dose not like the 100gr factory loads I was...

Guys I need some info a friend of mine has a montgomery ward super drednaught single shot 12ga. Well he dropped it the other day and busted the buttstock. Any ideas where we can find a replacement stock? It is kind of a family heirloom and holds sentimental value and they would like to have it...

I have shot both loose powder and pellets before. I went to pellets awhile back but now since i reload and realize that 5 grains of powder up or down can open or close groups in centerfire rifles i was thinking the same may hold true for blackpowder. give me some of your opinions

How many of you guys use a lee handpress ? And how does work on bottleneck rifle cartridges like .308 or .22-250 ?

Worked up some new loads for my stevens model 200 in .308 today and went to the range and wow!!! My 100yd group measured .71 inches for 4 shots and my 200yd group measured around 1 and a half inches for 3 shots.I cant wait to see what this rifle will do after i get a rifle basix trigger and a...

what can i exspect to get if i buy a 45 kahr?

I have tried TAC in my .308 loaded behind 165gr nosler ballistic tip. Accuracy was good but not as good as varget in my rifle. On the plus side Tac meters very well and is very clean in my experience.

Guys I want a "new" milsurp as in new to me. I was thinking of a K98 if I can find one under 200.00. My local range has a milsurp rifle shoot every month and the ammo for my m95 steyer is getting scarce. I also thought of a mosin-nagant or a schmidt ruben but just wanted your opinions on the...

Maybe I just got a good one but my 10/22 shoots great out of the box. granted i did try about 4 kinds of ammo before i found the one it liked the most (winchester xpert hollow point). But i can consistintly shoot dime size or smaller groups at 30yds and it will shoot mos (minute of squrriel)way...

Guys I have been wanting to either buy or build a 6.5 caliber rifle and am torn between the 6.5x55 and the 260 rem. I will handload for wich ever one I decide apon. Does one have a ballistic advantage over the other. And is the 6.5x55 brass readily available?The rifle will primarily be a range...

custom work on cz 52 custom work meaning ajustible sights, maybe threaded barrel and muzzle breaK. I have already done a little work on it, such as a new barrel , rollers new firing pin, trigger inhancement , and will probably drill and tap the trigger, so i can ajust trigger travel, and then...

Where can I get custom work done on my CZ-52 does anyone know where any info would be appreciated

:banghead: Guys I have just purchased a marlin model 81-dl and I have feed problems. It appears I may need a new cartridge carrier and extractor (I believe my nomenclature is correct) any way the carrier lets the cartridge flip up insted of holding it in line with the chamber if I push the...