Search results for query: *

The answer is: Yes you can purchase a firearm with a "florida only" DL. I had one for several years when I moved to florida from Pennsylvania to go to college. I wanted to purchase my first handgun when I turned 21 but only had a PA DL. A simple stop at the DMV and I believe $20.00 got...

For some powders the chart is pretty decent, with others it is way off. I do as MassMatt and write down the hole size that gives me the charge i'm looking for and put it on the load label, makes for easy prep when doing the same load the next time. For reference with unique I use for my...

DPMS Panther A3 Lite 16

As per my forum handle, I enjoy running 870's. My primary skeet/sporting clays gun is an Express I got back in 2003 for $190 NIB while working at Sports Authority. I started shooting skeet with it and i'd have to say that it probably has somewhere in the neighborhood of 25,000 shells...

Subsonic 147gr. loads give great performance in my G19 for target practice and IDPA shooting. Bullet: Precision Delta 147gr, FMJ FN Powder: V-N330 3.7gr Case: Various 9mm Primer: CCI 500 small pistol. I made up a batch loaded with 3.3gr of V-N330 and started to have FTE problems where...

That is the stock frame color, both are relatively new s/n's though so they might have changed more recently.

DIY project. As most know the factory Kel Tec finish isn't much to write home about. Orginally it was a blued version and it didn't much like the florida heat and humidity. I finally got tired of constant oil care and decided to do a duracoat finish. The slide from the factory had alot of...

As CatsEye stated, the only real problems comes from allowing the primer tray go empty. Also keep the trough clean of any spilled powder, usually a quick blast with compressed air every 200 rounds, or so, works fine. The only other issue is that the primer trough is a two piece design with a...

Kel-Tec Pf-9 Melted/dehorned slide Duracoated slide, mag tubes, and slide release Hogue Hand all jr. grip added Usually carried in a Desantis Nemisis but am planning on changing to a Desantis Super Fly as I love the one for my Kel-Tec P-3at.

I was in your situation earlier this year when I was building a 9mm to use for local IDPA carbine matches. I looked at both and personally liked the Eotech better as I found it faster to get onto target, very easy to use two eyed, and still able to precisely place a shot at 100-150 yards. I...

Stopped by a few gunshops this weekend, which usually never turns out good (atleast from my wife's perspective). At the last stop I found a rather odd little .22 rifle that piqued my interest. Basically brand new but on the used rack for $150 was an Armscor 1600R. Went around the shop a few...

I'll make another recommendation for the Hume 721 OT. I have it both for my G19 and Pf-9 and they are well made and work great.

Definitely a candidate for pocket carry. We don't have a specific weapons policy at work, so I do carry. My normal attire is Khaki shorts or pants and a polo shirt. I do alot of odd jobs so I needed a means of carrying and not ever having to worry about printing or my shirt coming up. For...

They make really fun project guns as well, really can do just about anything you want to them: Flip up BUIS: And the best part, short of purchasing an Eotech 512 to mount on the rail, the cost of the entire build project was just about $300.00 in parts and materials.

Yeah, Sniper Green Duracoat for the stock and HK Black Duracoat for the smaller pieces.

Hi Point 995, or atleast it was...

I shoot my Grandfathers Crescent Arms 12ga. SxS from time to time. 28" barrels, F and M, ivory bead. The metal has a nice worn sheen to it, the wood was a little rough but I added a few coats of truoil and brought back the shine, everything else orginal. Best date I can find for...

When I first zero'd my glock sights a long time ago, and also the sights on my AA .22lr kit and both are slightly skewed to the right. Thought it was just me until last months IDPA match when I talked with a armorer that says most of the guys in his department need the sights slightly to the...

I just completed a melt job on my PF-9 just last week. Most of the grinding was done with a diamond grinding bit, then sanding drums and wet sanded to final finish. I lightly sandblasted the slide for a slight texture and then shot with Sniper green duracoat: Close up of the melt...

The rail was fabricated out of a piece of raw rail stock from Evolution gun works. http://egw-guns.com/store/index.php?main_page=product_info&cPath=39&products_id=203 I drilled the holes to interface with the existing sight mounts on the reciever cover. I used and idea from a member over...