Quack
Member
Just got mine today 
remove the elevation screw:
lift BoMar leaf up.
Loosen set screw:
remove BoMar:
use a sight pusher to center the base to make sure the leaf fits in the cut out.
loctite the set screws
wipe off excess loctite
install leaf, loctite the screw and tighten.
remove the elevation screw:
lift BoMar leaf up.
Loosen set screw:
remove BoMar:
use a sight pusher to center the base to make sure the leaf fits in the cut out.
loctite the set screws
wipe off excess loctite
install leaf, loctite the screw and tighten.
