I did a search, but I still can't find anything addressing my specific problem.
I've been working on a Charles Daly 5" 1911 that was given to me years ago.
I recently installed Ed Brown components (hammer, sear, disconnector), and then wished to finish it off with a Caspian Trik Trigger. Everything works fine with the stock trigger, but after fitting the Caspian trigger, things went south. Basically, when I rack the slide, the hammer locks into position, but will not fall when I pull the trigger. The trigger stop screw is backed all the way out, so I know it's not hindering the process. Also, without the grip safety installed, the hammer will fall, but only after I pull the hammer slightly past the sear engagement point.
Thanks in advance for any help.
I've been working on a Charles Daly 5" 1911 that was given to me years ago.
I recently installed Ed Brown components (hammer, sear, disconnector), and then wished to finish it off with a Caspian Trik Trigger. Everything works fine with the stock trigger, but after fitting the Caspian trigger, things went south. Basically, when I rack the slide, the hammer locks into position, but will not fall when I pull the trigger. The trigger stop screw is backed all the way out, so I know it's not hindering the process. Also, without the grip safety installed, the hammer will fall, but only after I pull the hammer slightly past the sear engagement point.
Thanks in advance for any help.