Brass is LC 05, inspected prior to loading. H335 25.2 grains. 55 grain JSP at 2.225.
It's a fairly normal load and I've shot a few thousand just like this one.
So if you can see the photo, how serious a failure is this?
The round fired normally, but did not eject, both pieces of the casing were on top of the magazine, with the next round jammed in feed ramp.
I unjammed the rifle, pocketed the two pieces of the case, checked to see if the barrel was obstructed and kept on shooting. No additional problems.
All thoughts welcomed.
It's a fairly normal load and I've shot a few thousand just like this one.
So if you can see the photo, how serious a failure is this?
The round fired normally, but did not eject, both pieces of the casing were on top of the magazine, with the next round jammed in feed ramp.
I unjammed the rifle, pocketed the two pieces of the case, checked to see if the barrel was obstructed and kept on shooting. No additional problems.
All thoughts welcomed.