flytyer232
Member
- Joined
- Feb 12, 2016
- Messages
- 36
Hello,
I recently converted a 12 gauge Mec sizemaster to 28 gauge, and am having some issues setting up the crimp. I am using both Winchester AA HS and Franchi hulls, loaded with about 12 grains of 20/28 and 3/4 of an oz of lead.
On both of these loadings, when i go to final crimp, the crimp looks good, but the end of the shell is flared out to the point where it almost doesn't camber in the shotgun.
Any ideas on what to adjust? I have already tried adjust the pre-crimp and the cam, both up and down.
Thanks,
Mike
I recently converted a 12 gauge Mec sizemaster to 28 gauge, and am having some issues setting up the crimp. I am using both Winchester AA HS and Franchi hulls, loaded with about 12 grains of 20/28 and 3/4 of an oz of lead.
On both of these loadings, when i go to final crimp, the crimp looks good, but the end of the shell is flared out to the point where it almost doesn't camber in the shotgun.
Any ideas on what to adjust? I have already tried adjust the pre-crimp and the cam, both up and down.
Thanks,
Mike