Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

29-2 advice

Discussion in 'Handguns: Revolvers' started by Chillaxin, Sep 22, 2011.

Thread Status:
Not open for further replies.
  1. Chillaxin

    Chillaxin Member

    Joined:
    Sep 18, 2011
    Messages:
    35
    Long time lurker on this site and I finally decided to sign up. I know it has been discussed before but I'm going to ask it again. I recently inherited a 29-2 with an 8-3/8 in barrel. It came with the walnut display case etc etc. The gun was bought new in 1976 by my father and he never shot it. One day I want to shoot it, the next day I don't. What would you do? Thanks for the advice.

    -C-
     
  2. teumessian_fox

    teumessian_fox member

    Joined:
    Jun 3, 2010
    Messages:
    227
    Location:
    Staying ahead of the Big Dog
    I'd shoot it, but that's just me.
     
  3. willypete

    willypete Member

    Joined:
    Oct 4, 2008
    Messages:
    418
    I'd probably vacillate for a while, then shoot it. Shooting it after that wouldn't be such a hard choice :D
     
  4. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    I'd shoot it and think of my Dad every shot. It's a way of connecting with him in a way unique to only the two of you.
     
  5. Zundfolge

    Zundfolge Member

    Joined:
    Dec 24, 2002
    Messages:
    10,755
    Location:
    Colorado Springs
    The only reason not to shoot it is if you're going to sell it.


    Shoot it.
     
  6. BossHogg

    BossHogg Member

    Joined:
    Dec 28, 2008
    Messages:
    689
    Location:
    Arkansas
    If your dad didn't shoot it nor would I. A great gun and all you would do is devalue the gun. He must have bought it for the value.
     
  7. Arcticfox

    Arcticfox Member

    Joined:
    Jul 31, 2006
    Messages:
    280
    Tough call. I really don't know what I would do. If you have the funds, by a well used 29, fire it, and keep your dad's as a show piece.
     
  8. madcratebuilder

    madcratebuilder Member

    Joined:
    Jul 15, 2007
    Messages:
    5,020
    Location:
    Northern Orygun
    This. I suspect you well be keeping it, if so go shoot it.
     
  9. Chillaxin

    Chillaxin Member

    Joined:
    Sep 18, 2011
    Messages:
    35
    Thanks for the replies guys. No, I do not plan on selling it. I do have other revolvers to shoot but struggle with the "safe queen" concept. I think it is more the fact that HE didn't shoot it that actually gets next to me. I've personally always wanted to shoot it but it wasn't my call. Now it is and I want to make the right call........
     
  10. RDCL

    RDCL Member

    Joined:
    Jan 31, 2009
    Messages:
    269
    Location:
    Westlake Ohio
    You didn't mention finish, is it nickel or blue?

    I ask because if it is a pristine nickel finish I wouldn't shoot it much if at all. In my experience a nickel finish won't stand up to lots of shooting and cleaning solvents over the years the way a blued finish will.

    If I had purchased my own nickel-finished gun I'd shoot it and maintain it as best I could........but if I inherited a mint nickel gun from dad I'd not shoot it and I'd keep it polished like a mirror in his honor.

    .....this is just my opinion though. Others might certainly disagree.
     
  11. Chillaxin

    Chillaxin Member

    Joined:
    Sep 18, 2011
    Messages:
    35
    It's a Blued finish. It does have SLIGHT cylinder spin marks on it and I mean SLIGHT. I;m guessing that he worked the action a few times while cleaning it over the years.
     
  12. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    14,755
    Location:
    West Tennessee
    I differ from most on things like this. To me, there is little or no sentimental value in something Dad bought, put on a shelf and never used. I have fond memories of Dad teaching me to shoot with his old, well-used Hi Standard H-D Military in a gorgeous floral carved H.H. Heiser holster. As well as him hunting small game and taking it to the range. I have fond memories of Dad shooting running pigs with his Ruger Bisley .44Mag. I have fond memories of having the loudest pistol on the range when we shot the Automag II and him knocking over rabbits with it. Those are guns I will inherit when he passes, hopefully a long way away and I could never even consider selling them.

    I have zero fond memories of anything he bought and didn't use.

    In your situation, that S&W is worth a lot more to a collector unfired in its box. The 8 3/8" barrel has little appeal to me on a bull-barrelled N-frame. I would make the decison to either shoot it or sell it and buy something I 'would' shoot. Maybe something like a 4" 24-3 or Elmer Keith commemorative.

    That said, there is little sacred about a 35yr old NIB S&W. Yes, it might be worth a couple hundred more to a collector unfired but really, who cares??? For example, I bought this NIB 6½" 24-3 almost two years ago and paid the princely sum of $850. Did I put it on a shelf? Hell no, I swapped the stocks and took it right out and shot it. I'll keep shooting it and enjoying it and eventually hunt with it. Why? Because life is too short and I'd rather spend it pretending to be Elmer Keith than looking at an unfired and unloved S&W, saving it for a nameless/faceless future collector.

    [​IMG]
     
  13. Gordon

    Gordon Member

    Joined:
    Dec 26, 2002
    Messages:
    8,298
    Location:
    central Kali.
    Blued with light cyl. drag > Go ahead and shoot it some with a good cleaning it will lose no value IMHO. It is pinned and recessed (P&R) and that is what will hold up the value. I LIKE 8 3/8 29-2s . and while mine is well worn after 35 years of use it still shoots like a rifle. After thousands of rounds it went to S&W in the early 90s for an action rebuild, they wanted to refinish but I declined, I like it the way it is ! It wuz carried mostly in a Bianchi shoulder rig, many miles hiked when I wuz young! It is back in it's old Mahogany box it came in, the 6" 629-2 and 629 Mountain revolver replaced it , sigh !
     
    Last edited: Sep 23, 2011
  14. DM~

    DM~ Member

    Joined:
    Jan 6, 2011
    Messages:
    2,241
    Location:
    upper mid west
    You aren't going to sell it! Your dad "saved it" for you to shoot, so SHOOT it!

    DM
     
  15. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    I agree.
    You said you don't plan to sell it?
    So shoot it.

    If you don't shoot it, somebody else will.
    When your kids sell it at your estate sale for $150 bucks!

    I also agree with the others that if it already has a turn line, shooting it, followed by proper cleaning will not hurt the value.
    If you are worried about it loosening up with a steady diet of .44 Mag?
    Shoot lead bullet .44 Specials in it.

    It will stay tight about 350 years with them.

    rc
     
  16. Radagast
    • Contributing Member

    Radagast Moderator Staff Member

    Joined:
    Dec 24, 2002
    Messages:
    8,148
    Location:
    Australia/OZ
    Shoot.
    It is no longer ANIB with a turn line, so any future buyer will think it has been shot.
    I second rcmodel, use .44 Special as the early .44 magnums didn't stand up well to a constant diet of magnum ammo. Engineering changes in the mid 80s changed that.
     
  17. Chillaxin

    Chillaxin Member

    Joined:
    Sep 18, 2011
    Messages:
    35
    Thanks for all the advice. I think I will put some rounds through her this weekend. It kills me to look at a good revolver just sitting there. And as many have pointed out I am NOT selling this gun (or any of my collection). I would much rather my boys, or my girl, to have fond memories of shooting this firearm and understanding the history it represents. I'm extremely happy I finally signed up at THR.
     
Thread Status:
Not open for further replies.

Share This Page