Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

44mag brass

Discussion in 'Handloading and Reloading' started by alcmaeon, Jan 31, 2003.

Thread Status:
Not open for further replies.
  1. alcmaeon

    alcmaeon Member

    Joined:
    Dec 24, 2002
    Messages:
    72
    Hey All

    I don't reload yet but plan to start in the next year or so to feed my Smith 629. So I have been keeping all the brass I've shot for future reloading.
    I'm about to buy a bulk (1000rds) amount of commercial loaded 44mag rounds. I'm either going to buy from Georgia Arms (240gr JHP or LSWC) or I'm going to buy Federal American Eagle 240gr JHP.
    Which of these has better brass from a reloaders viewpoint? I can get both for about the same cost after shipping.

    Thanks Guys
     
  2. larryw

    larryw Member

    Joined:
    Dec 22, 2002
    Messages:
    1,655
    Call Georgia Arms and ask them what brand and type they're using for the load you're buying. If its Starline, confirm that its not nickel plated.

    IMO, Starline brass (not plated, which splits after a couple uses) is the absolute best for 44Mag.
     
  3. griz

    griz Member

    Joined:
    Dec 25, 2002
    Messages:
    2,371
    Location:
    Eastern Virginia
    I'll second that. All the new Ga Arms ammo I have seen used Starline cases. (the reloaded stuff uses other brass) The quality of Starline brass is great and they do not have a cannalure in the case. I appreciate that.

    FWIW, Starline also sells their brass at good prices if you want to skip the first step in the shoot, reload, shoot cycle.
     
  4. Paul "Fitz" Jones

    Paul "Fitz" Jones Moderator - Emeritus

    Joined:
    Dec 26, 2002
    Messages:
    827
    Location:
    Northern Calif
    44 Mag brass

    The worst brass is Remington nickel plated as it splits the soonest as it is the thinnest. The best brass is Federal, Winchester and Starline has a good reputation also.

    In bullseye shooting Federal primers are the most reliable but some shooters like Winchester for the 50 yard range.

    Some tips from an old timer who had his first reloading business in 1952.
     
  5. pinetree64

    pinetree64 Member

    Joined:
    Jan 2, 2003
    Messages:
    292
    Location:
    Cumming, GA
    I buy reloading supplies from GA Arms at the local gun shows. The new 44spcl brass I bought was Starline. I have roughly a 1000 44mag cases in rotation. Most of my shooting is with moderate loads and I have had very few split cases. Nice thing about revolvers is you don't have the loss factor of seaching fro brass.

    Why 44spcl, my range is real picky about magnums. Though I'd prefer to shoot a light loaded 44mag, its not worth the hassle from the old-timers.
     
Thread Status:
Not open for further replies.

Share This Page