bbqreloader
Member
facts:Sig p220, 45 acp, xtreme 185gr fp plated, rcbs dies, rockchucker, mixed cases. Powder ranges from univerasal, cfe, hs6.
OAL- have loaded several hundred rounds at 1.220 with no issues. But as of lately about every 4th or 5th round, the slide does not come forward. When I go to eject, it take some force to get the slide back. The brass comes out, powder spills out, but the bullet is stuck in the mouth of the barrel. Set my original OAL with a plunk test, but was using RN bullets when I did it.
Crimp is light at a .471.
Thought process is that the OAL needs to come down 1.210? (measured some manfacturer rounds and they average to a 1.210)
Am I on the right track with the solution based on the description?
OAL- have loaded several hundred rounds at 1.220 with no issues. But as of lately about every 4th or 5th round, the slide does not come forward. When I go to eject, it take some force to get the slide back. The brass comes out, powder spills out, but the bullet is stuck in the mouth of the barrel. Set my original OAL with a plunk test, but was using RN bullets when I did it.
Crimp is light at a .471.
Thought process is that the OAL needs to come down 1.210? (measured some manfacturer rounds and they average to a 1.210)
Am I on the right track with the solution based on the description?