A local gun shop has some VV N-110 powder at a good price so this is a powder I'm interested in using for .44 Magnum and .45 Colt. Let us know what kind of velocities you're getting from your .45 Colt loads since that could be very helpful in estimating case/cylinder pressure.
There isn't a lot of load data available for VV N-110 and the .45 Colt, however, I did manage to find these loads on
Handloads.com.
240gr Sierra 22.0 gr N110 1,300 fps CCI350
(Full power with no signs of over-pressure. Should make a great hunting load.)
300gr LFP 18.0 gr VV-N110 1,100 fps Fed LP
(By comparing data from differen pwder manufacturers and looking at "relative burning rate" charts, and using a chronograph to check my loads, i was able to use this powder.start at 17 grs. velocity in 7,5" ruger bisley. for tc/ruger only.)
323gr LBT-LFN 20.0 gr Vihtavuori N110 1,309 fps Fed LPM
(The bullet used in this load is made by a Finnish manufacturer,Gunhill.It is a superhardcast with gascheck.Velocity is from 5.5in Ruger Bisley.)
325gr nei swc 18.5 gr VV N110 1,240 fps WLP
(Ruger Blackhawk/Redhawk, Dan Wesson, Colt Anaconda, Casull only. Powerfull load, enough to hunt any game in North America)