Hey guys, I've recently built a 6 dasher remage setup that I wanted to share about. It's a nss criterion 7.5 twist 26" remage barrel threaded 5/8x24, Remington action, ptg bolt, trued recoil lug and nut, timney Calvin elite trigger, and a mc3 legend stock. Shot several different loads and wasnt getting any accuracy that satisfied me until I tried the 107 smk and re16. It ended up well below 1/2moa using norma dasher brass and cci 450 primers. I settled upon 107 smk, norma brass trimmed to lapua length, cci 450, 35.5gr re16. Heres a picture of my first group at distance to prove the load. This was shot at vets shooting center @ 600yds.