7.62X39 with Accurate 2200 & VMAX Bullet

[Garage Dog]

I'm looking for loading data for the 2200 powder with the VMAX .310 123GR bullet. Hornady does not have any data for this bullet with the 2200 powder yet. I have searched everyplace I can think of, but haven't found anything yet. I even tried Load Data.com. I just fired off an email to Accurate to see if they have any info. Have anyone here loaded this combo in the past? I have both large and small primer brass.
BTW, these will be shot out of an AK 47.

 

[steve4102]

Data can be found on Accurate's web site.
123gr Hornady SP, data can be used for the 123gr V-Max. In fact Hornady puts these two bullets on the same page in their manuals.

http://www.accuratepowder.com/wp-content/uploads/2010/09/WP_LoadSpec_1-23-14.pdf

 ACCURATE 2200
123 HDY SP 24.5 2,161 27.3 2,405 44,281 2.187

 

[Garage Dog]

Thanks Steve, I found that info on pg 46 on the PDF link you sent which is the same link Accurate attached to the email they replied to me, however that is not the load they specified. The load they gave me was as follows: He did state the SST loads will work with the VMAX as well.

Per Accurate's email to me:
123 gr HDY SST .310 or .311 26.5- 2183
29.4- 2387

I wonder why the difference?

 

[steve4102]

"Why the difference" is not important. What's important is that your Start Low (24.5gr) and work up.