I am wondering what to check to fix my problem, have a couple of manual with starting loads using h414 and they make my bolt lift a little hard. This is on the 45.5 grs of h414 load. Haven't had any problems in the 41 to 43 grain range.
I am loading 139 gr sst hornady factory seconds. Close to the factory so get them fairly cheap. so here are the number and manuals And no I don't own a chrono yet just starting to reload and can't afford one right now, at least not until work picks up.
hodgdon and lee both list 139 gr with h414 is 139 GR. HDY SP Hodgdon H414 .284" 2.800" 45.5 2710 40,400 CUP 47.0 2810 44,100 CUP
hornady manual 7th ed is
40.8 to49.9
lyman 49th is
42.3 to47.6
I am loading 139 gr sst hornady factory seconds. Close to the factory so get them fairly cheap. so here are the number and manuals And no I don't own a chrono yet just starting to reload and can't afford one right now, at least not until work picks up.
hodgdon and lee both list 139 gr with h414 is 139 GR. HDY SP Hodgdon H414 .284" 2.800" 45.5 2710 40,400 CUP 47.0 2810 44,100 CUP
hornady manual 7th ed is
40.8 to49.9
lyman 49th is
42.3 to47.6