7mm Rem. Mag & 160gr Accubond data?

[corey006]

Anyone have the NEW Nosler manual and data for the 160gr. Accubond in 7mm Rem Mag?

I am particular interested in the most accurate loads tested(if they still have this feature) and H1000, RL22 or Retumbo loads.

Thanx in advance.

 

[ForneyRider]

Their website has a lot of load info for rifle.

 

[corey006]

There website only shows 3 loads for 160gr. Rem Mag.

They specifically do NOT list all the loads because then NO-ONE would buy the actually manual.

Unless there are only 3 loads for 160gr Accubond or Partition?

 

[afsenior]

In Nosler's RG#6, only one of the three powders you asked for is listed. RL22 - "most accurate" is 59.0 grains (2868fps) which is a starting load. Maximum load is 63.0 grains (3058fps). Do not go directly to these loads without checking the book with your own eyes please. You may also call Nosler and they will do thier best to answer your questions.

 

[afsenior]

FYI, most accurate load for my Rem 700 7mm Rem Mag using H1000, is 65.0 grains behind a Nosler 160AB lit by a Federal 215M primer. According to the Hodgdon 2008 Manual, this is 1.0 grains UNDER MAX load. As before, double check please and start low!

 

[Seafarer12]

Use the same data as the BT it is pretty much the same bullet.

 

[ForneyRider]

I use RL22 for 162 Hornady in 7mm Mag.

Good stuff.