newrugersafan
Member
- Joined
- Nov 29, 2009
- Messages
- 58
Hello All
I have made a mistake and need to know if I should pull a bunch of bullets.
I have loaded some 9mm with 4.6 grains HP-38 and Hornady 115 gr. XTP bullets.
I used the wrong overall length and made them up at 1.025 I realize the manuals state 1.09 or 1.125 depending on which one you look at.
My question is .... can some one with a program run this load and tell me if it exceeds recommended CUP pressures?
Thanks for any and all help
Mike
I have made a mistake and need to know if I should pull a bunch of bullets.
I have loaded some 9mm with 4.6 grains HP-38 and Hornady 115 gr. XTP bullets.
I used the wrong overall length and made them up at 1.025 I realize the manuals state 1.09 or 1.125 depending on which one you look at.
My question is .... can some one with a program run this load and tell me if it exceeds recommended CUP pressures?
Thanks for any and all help
Mike