I am new to reloading and have a minimum OAL question.
Hornady 124 JHP
CCI Primers
4.0-4.6 231
Range Brass Most F.C and Remington
Shooting my 226 I feed Manufactured Hornady 124 JHP like a champ with an OAL 1.0935-1.1075
I reloaded about 30 rounds half at 4.3 and the other at 4.6 of 231. With an OAL of 1.115-1.123. I am worried at this point about the pressures that might be higher due to being below the lee MIN OAL of 1.142 but my Speer manual gives the COAL TESTED at 1.12. Also seems like I may have loaded .1 grain over should I pull them or start with the 4.3 and give the 4.6 a shot?
Thoughts from people who know what the heck they are doing?
FNG:banghead:
Hornady 124 JHP
CCI Primers
4.0-4.6 231
Range Brass Most F.C and Remington
Shooting my 226 I feed Manufactured Hornady 124 JHP like a champ with an OAL 1.0935-1.1075
I reloaded about 30 rounds half at 4.3 and the other at 4.6 of 231. With an OAL of 1.115-1.123. I am worried at this point about the pressures that might be higher due to being below the lee MIN OAL of 1.142 but my Speer manual gives the COAL TESTED at 1.12. Also seems like I may have loaded .1 grain over should I pull them or start with the 4.3 and give the 4.6 a shot?
Thoughts from people who know what the heck they are doing?
FNG:banghead: