AzShooter1
Member
I took my 617s and tuned them up a little more. The 4 inch needed smoothing of the action so out came my stones. Trigger pull was pretty good but not real smooth so I stoned the rebound slide some more, the hammer and trigger.
Hammer falls at 44 ounces. Hopefully that will work with all the .22 ammo I have.
Double Action pull is averaging 8.7 pounds. A bit heavy but that's what it takes to consistently fire off my ammo. Trigger pull is a lot smoother now that I've done the extra stoning and smooth is better than light any day.
My 6 inch needed a new red dot sight on it. I installed a C-More Railway with an Allchin mount. This Railway is the polymer one without click adjustments so I have to be sure I turn it completely off or batteries die quickly. For Steel Challenge I set it up with a 12 MOA dot. It's still very accurate but I only need to hit 10, 12 and 18 X 24 inch plates so I don't need a small dot.
Took about 2 hours to tune up the 4 inch and no time to install the new dot on the 6 inch so it was a good morning.