Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AK47 hand loads

Discussion in 'Handloading and Reloading' started by rikman, Mar 12, 2012.

Thread Status:
Not open for further replies.
  1. rikman

    rikman Member

    Joined:
    Jan 3, 2004
    Messages:
    822
    Location:
    People's Republic of IL
    I just bought an AK47 and plan to reload 7.62x39. Any tips tricks with this gun and cartridge ?
     
  2. R.W.Dale

    R.W.Dale Member

    Joined:
    Oct 14, 2005
    Messages:
    11,375
    Location:
    Northwest Arkansas
    Yes

    4.99 a box academy fmj is your friend.

    Unless you need a hunting load or just want to see how good you can get your rifle to shoot there's no advantage to handloading this caliber.



    posted via mobile device.
     
  3. rikman

    rikman Member

    Joined:
    Jan 3, 2004
    Messages:
    822
    Location:
    People's Republic of IL
    RW,

    I was wondering that as well, I see Russian ammo cheap at LGS if it was worth it, that's why I don't bother with 9mm.

    I was wondering also if there was anything special to consider with the rifles loose tolerances you hear about.

    The test target with this gun was impressive, 30 yds I think, all in the same hole.
     
  4. zoom6zoom

    zoom6zoom Member

    Joined:
    Apr 24, 2006
    Messages:
    2,908
    Location:
    Virginia
    Most of the stuff you "hear about" AK's are from people who have never owned or fired one.
     
  5. R.W.Dale

    R.W.Dale Member

    Joined:
    Oct 14, 2005
    Messages:
    11,375
    Location:
    Northwest Arkansas
    The thing is x39 ammo is only slightly more expensive than 9mm

    X39 brass isn't exactly cheap and once fired is hard to come by. Combine that with throwing brass far and wide and denting it up badly and it just ain't worth it.

    posted via mobile device.
     
  6. vtuck2

    vtuck2 Member

    Joined:
    Mar 4, 2012
    Messages:
    69
    Location:
    Texas
    Hi,

    I don't know how much experience you have reloading generally, or for military semi-autos specifically. And I certainly do not intend to come across as an expert because I am not.

    But, in addition to the very true comments you've already received (it ain't worth reloading for this caliber) and with which I agree, I will offer this.

    Leaving out the fact that you can simply not save any money reloading, there are some safety issues relating to military rifles, especially autoloaders.

    First, is "hard primers". There is a special grade of primer made for this. If you use regular primers there's an enhanced possibility of an AD upon chambering a round. Hard (that is to say "insensitive") primers do not eliminate this risk but they minimize it.

    The second risk applies to all autoloaders (rifles and pistols) and not just military weapons. It is "squibs". I imagine you know that a squib means that the primer has fired but has not ignited, or has only partially ignited, the powder charge. The result is that the bullet fails to exit the barrel.

    Sometimes, but not always, the bullet travels such a short distance that, even if you manually load the next round, it will not fully chamber, and the gun will not fire.

    It has happened to me, with a Makarov pistol, that I had a squib but, somehow, there was enough of a detonation that the gun actually DID cycle and it DID chamber a new round, and this new round DID go into battery. It was only because the report sounded funny and because the recoil felt funny, that I did not pull the trigger again.

    Had I done so, I would have blown up the gun, and possibly, my face. The bullet was about halfway down the barrel, stuck.

    On that occasion I was using high end factory ammunition - not reloads. However, I would point out that, in my opinion, no hand loader is gonna have the equipment, the quality control systems, and the ORGANIZATION to produce ammunition that is reliable as factory ammo. I did not say more accurate, but more reliable.

    Hence, I would be very disinclined to reload for any autoloader, and especially for a military type semi-auto. It is all too easy to get a squib, your finger twitch, or for whatever reason, continue shooting, and have an accident.

    This is on top of the fact that brass is expensive and you NEVER recover all of it. Sometimes I think that the cases have gone into near earth orbit because no matter how hard I look I simply cannot find them. Brass is possibly the most expensive single component of a bullet and is the ONLY one that can be recycled.

    All of the above is why you're best off shooting (and hand loading for) revolvers for fun and autoloaders for whatever other purpose you may have.

    That's my story and I'm stickin' to it.

    VT
     
    Last edited: Mar 13, 2012
  7. Ledhore

    Ledhore Member

    Joined:
    Dec 3, 2010
    Messages:
    76
    Location:
    Northwest desert
    Learn how to anneal brass. I get over 20 reloads on my brass by annealing every 5th or 6th time. Use a bullet apropriate for your barrel. Some AK's have fairly large groove diameters and require .310 or .311 bullets, or if using cast bullets, even larger. Best accuracy is often not max velocity - H4198 works well for me. AK's can be a lot more accurate than you often hear.
     
  8. David Wile

    David Wile Member

    Joined:
    Jan 4, 2003
    Messages:
    634
    Location:
    Mechanicsburg, PA
    Hey folks,

    I've been reloading more than 50 years, and more than 40 of those years have been for semi-auto rifles and handguns. Not once in all of those years have I ever had a cartridge fire except when I pulled a trigger and the bolt was fully closed. That includes factory ammunition as well as my reloaded ammunition, and I only shoot factory ammunition when I buy it to get the brass for reloading.

    In addition to shooting jacketed bullets in semi-auto pistols and rifles, I also do what a lot of folks decry - the use of cast bullets in semi-auto rifles as well as pistols. Yep, even use them in gas operated rifles like my M-1 Garands as well as others. My semi-auto rifles have included three M-1 Garands; a Colt AR-15 in .223 (no cast bullets in .223 however); at least seven rifles in 7.62X39 including one Colt AR-15, two AK-47s, three Russian SKSs, and a Ruger Mini-30; a 6.5X55 Swedish Ljungman; and an M-1A.

    In all my reloading for all those semi-auto rifles I always used plain old standard rifle primers - no magnums and not hardened. I also used cast bullets in all of them other than .223 and the 6.5X55 Swede. The reason for never using cast bullets in those two calibers was because I never had bullet moulds for those two calibers. I do cast for a lot of different calibers, but off the top of my head I guess I only used one .30 caliber cast bullet for all my semi-auto rifle use. It is a 155 grain gas checked Guy Loverin design and is sized to suit each rifle used.

    In my experience, I have not had any problems with reloading for semi-auto rifles or pistols. Do I lose brass? Sure do, but I generally shoot where I can recover my brass more easily. I also do not find that my semi-auto brass lasts a long time since I shoot mild loads.

    Best wishes,
    Dave Wile
     
  9. Mikee Loxxer

    Mikee Loxxer Member

    Joined:
    Jan 26, 2006
    Messages:
    781
    Location:
    Lincoln NE
    My quality control is much better than factory as I can inspect EVERY cartridge to make sure there is an adequate powder charge to ensure that the bullet leaves the barrel. Manufacturers only inspect samples of batches.
     
  10. gamestalker

    gamestalker member

    Joined:
    Sep 10, 2008
    Messages:
    9,832
    Location:
    SW Arizona
    Vtuck2

    " No hand loader is going to have the equiptment, quality control systems, ORGANIZATION to produce ammunition that is as reliable as factory "

    I will argue your opinion, and question your source regarding quality control of reloads v.s. quality control of factory. That said, in more than 30 yrs. of reloading, and nearly 50 years of shooting I have yet to encounter a squib, mis-fire, or any other failure from one of my own reloads. I have however wittnessed countless squibs and mis-fires that other reloaders have encountered with their reloads. In fact, I have seen some guys that had almost as many failures as they did functional reloads of their construction.

    On the flip side, although I have never had a squib with factory amunition, I have indeed had numerous mis-fires with factory ammunition. I'll trust my reloads hands down against any factory ammunition regardless of it's price / quality. If an individual is reloading correctly it goes without saying that reloads are going to be significantly better in every aspect, including reliability.

    I load on a single stage press for auto loading weapons, bolt actions, wheel guns, and shotshell. Other than the basic reloading set up, what quality control or other necessary equiptment is going to reduce squibs or mis-fires? 99.9% of all failures are the result of a reloader not reloading correctly, and such individuals need to go back to square A of the learning process.
    GS
     
  11. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    If you had a squib, you forgot to put the powder in it, or at least not enough powder due to a powder measure bridging, etc.

    Simple as that.

    Squibs simply do not happen without some help from a careless reloader.

    rc
     
  12. Ledhore

    Ledhore Member

    Joined:
    Dec 3, 2010
    Messages:
    76
    Location:
    Northwest desert
    Ditto on the standard primers. All I use are winchester large rifle primers and never a slam fire in many thousands of rounds. But then I do clean my gun often and verify the firing pin is clear of debris. Using cast bullets, home made aluminum gas checks, bulk component buys, and annealing brass, I'm loading 7.62x39 for $80 a thousand and getting damn good accuracy with a scoped AK.
     
  13. gamestalker

    gamestalker member

    Joined:
    Sep 10, 2008
    Messages:
    9,832
    Location:
    SW Arizona
    I don't know where you got your information Vtuck2, but it lacks fact. If this is what your experience has been with reloaded ammunition, you've either been associating with some very careless, and or, inexperienced reloaders. If you ask most reloaders what inspired them to reload in the first place, I'll bet you most will say it was to produce better quality ammunition, while saving a few pennies per round. Quality of course includes reliability and accuracy.
     
  14. animator

    animator Member

    Joined:
    Nov 26, 2010
    Messages:
    477
    Location:
    DFW, TX
    Any decent sources for brass, or do I have to buy the "expensive" stuff from walmart and keep reloading that brass?
     
  15. FROGO207

    FROGO207 Member

    Joined:
    Dec 7, 2008
    Messages:
    6,299
    Location:
    Mount Desert Island Maine
    I am with R W Dale on this one. I find that with my SKS that reloads are only marginally better and the cost of commercial components makes reloading almost a wash for me. I think that if you do not need .311 bullets that it would be more cost effective. I have all the components to reload 1K as well as the dies, I can reload IF needed. :) But why??
     
  16. vtuck2

    vtuck2 Member

    Joined:
    Mar 4, 2012
    Messages:
    69
    Location:
    Texas
    Quote:
    "Squibs simply do not happen without some help from a careless reloader.

    rc"

    Guys,

    To be clear: In my entire lifetime I've had two squibs. Both were from the same box of high end factory "self defense" ammunition. The first one had partial ignition. It ejected the round, chambered a new one, and went into battery. But the report and recoil were weird so I stopped and checked.

    Therefore, I must conclude that the round DID have a powder charge.

    And to be clearer: I have yet to reload my first round. So, needless to say, I'm not claiming to be any kind of expert. Notwithstanding that some people may have had perfect results reloading I've seen many reloads fail. Empirically, I cannot assert that factory ammunition is more reliable than reloads. But subjectively, it would seem logical that it is. No hand loader has the kind of material, financial, and organizational resources that a "for profit" business does.

    So, notwithstanding that there's always an exception to be found to every statement, I would still trust factory ammunition over reloaded stuff for both autoloaders and concealed carry.

    Just an opinion by a "two squib" guy who's always used factory ammunition (but who will soon go down the hand loader's trail).

    V
     
  17. animator

    animator Member

    Joined:
    Nov 26, 2010
    Messages:
    477
    Location:
    DFW, TX
    For what it's worth, I trust my handloads more than I trust factory ammo, and I trust factory ammo more than I trust someone *else's* reloads...
     
  18. rikman

    rikman Member

    Joined:
    Jan 3, 2004
    Messages:
    822
    Location:
    People's Republic of IL
    Ok,

    I shot the new SGL21 yesterday. Lots of fun. Soft shooting with that muzzle break. More accurate than I expected. So, I shot steel cases and 40 rounds of brass S&B. All cases had a nice gash and dent just below the shoulder.
    1) Is this case abuse normal for AK's?
    2) quick search shows brass not too available and expensive
    3) should I just shoot the russian steel or czech brass?

    Thanks in advance,
    Rikman
     
  19. David Wile

    David Wile Member

    Joined:
    Jan 4, 2003
    Messages:
    634
    Location:
    Mechanicsburg, PA
    Hey Rikman,

    The 7.62X39 is soft shooting in any rifle with or without a muzzle break. Then again, I only ever shot it in semi-auto rifles, and semi-autos absorb virtually all the felt recoil to me. I used the 7.62X39 in AK, SKS, AR, and Mini-30, and it seems they all put a dent somewhere below the shoulder. Some may be more pronounced than others, but they are nothing to worry about. I simply full-length resize the cases and reload.

    The dent in the reloaded round will disappear when discharged in your rifle, and for a few parts of a second it will look perfect until it is once again dented in the extraction process. I load more on the mild side and get many loadings out of my brass. In fact, I have more problems losing such brass rather than wearing it out.

    If you are going to shoot where you will have a lot of problems finding your spent brass, I would then think it would be better to shoot the cheap blast and forget-it stuff. If you can recover all or at least most of your brass, then I would go for reloadable ammo and make my own. I have not bought any new ammo for a lot of years, but I think there are some sources to buy Boxer primed ammo today at a reasonable price. If you can recover your brass, you can reload very good quality ammo for less money than the blasting kind.

    While I bought a large supply of Russian bullets years ago at a very good price, I actually use my own cast bullets most of the time. When using cast bullets for reloading, the cost per round comes down real far. The time spent making each round goes way up with cast bullets, but that is just good time for me - I don't play golf.

    So, if you can recover your brass, by all means reload your own. If you cannot recover your brass, buy whatever is the cheapest you can find. Either way, have fun shooting.

    Best wishes,
    Dave Wile
     
  20. armoredman

    armoredman Member

    Joined:
    Nov 19, 2003
    Messages:
    16,433
    Location:
    proud to be in AZ
    I see some people posting who think reloading is a chore or only done to save money.
    First and foremost, I posted before that using the very nice Berry's plated .311 125 grain bullet I can load for less than that $4.99 Academy, without shipping costs. I also cast for the round, and that drops the costs FAR lower.
    I reload not just for better accuracy, which is one, or to save money, which is another, or even to keep shooting when the WalMart shelves are bare, (2009 was a good year for range time), but because I enjoy it. I enjoy loading, casting, and having a nice finished product I know I can trust.
    BTW, I have never used magnum primers in 7.62x39mm reloads. I currently use a vz-58 and CZ 527M in this caliber, and have no issues with plain jane Remington 9.5 primers. Especially with the bolt action, finding my brass is VERY easy. :)

    Forgot to add, I reload and cast for 9mm, too. :) Guess I am all kinds of screwed up, ain't I? :D
     
  21. rikman

    rikman Member

    Joined:
    Jan 3, 2004
    Messages:
    822
    Location:
    People's Republic of IL
    Thanks for the replies guys,

    I think I'l buy some Lee dies and see what I can make. My hand loads have certainly been way more accurate than factory ammo.
     
  22. Fisherdave10

    Fisherdave10 Member

    Joined:
    Jul 21, 2010
    Messages:
    71
    Location:
    Western WA
    Hey VT,
    Even though you have many strong and obviously very educated and well informed opinions about reloading, I disagree with nearly all of your statements. Especially that reloading does not save you money and that reloaders are not able to meet or exceed factory ammo reliability. I have reloaded and fired over 500 rounds in the AR-15 I recently built. I have had absolutely ZERO problems. I can't say the same about the 100 or so rounds of Federal factory ammo I have shot through it. Also, my reloads are significantly cheaper (19 cents vs. 33 cents, which is actually a pretty good price for factory ammo) and have superior accuracy.
    I rest my case.:rolleyes:

    To the O.P.
    My friend recently bought an Arsenal SGL21 and we found a great deal of 500 pieces of brass at the last gun show. Finding cheap .310" bullets may be interesting but he agrees, steel is the way to go for blasting away but for hunting rounds or rounds that may be considered 'premium', reloading will save a LOT of money. Buy cheap steel ammo for plinking and unless you can find a good deal on FMJs, use the brass to load quality ammo. His AK doesn't 'tear up' brass ammo, but it does put a decent dent into the side of it. He was shooting Winchester brass cased that he got at the gun show.
     
  23. rikman

    rikman Member

    Joined:
    Jan 3, 2004
    Messages:
    822
    Location:
    People's Republic of IL
    Fisherdave10,

    Thanks, for the reply. I've never been able to make it to a local gun show or any for that matter. I'll check one out soon for reloading components.
     
  24. rikman

    rikman Member

    Joined:
    Jan 3, 2004
    Messages:
    822
    Location:
    People's Republic of IL
    Here are a few of my beat up 7.62x39's (s&b)
     

    Attached Files:

  25. HJ857

    HJ857 Member

    Joined:
    Jun 14, 2007
    Messages:
    573
    You also have the option of modifying the steel case ammo. Pull the bullet, dump the powder and replace with the powder of your choice and re-seat the bullet.

    I used to do this a lot a few years ago using IMR 4895. Steel cased ammo has huge variances in neck tension, powder charge and bullet weight. By "remanufacturing" the ammo you can at the very least, control powder and neck tension and that does show up as better accuracy.

    This is a lot less work than fully reloading a cartridge and powder is your only extra cost.

    You can replace the bullet as well if you want to build a more specific cartridge. I found the 125grain Sierra Pro Hunter bullets to work very well.
     
Thread Status:
Not open for further replies.

Share This Page