btsyshsbnd
Member
- Joined
- Sep 28, 2006
- Messages
- 30
are the mags from a taurus pt92 interchangable with a beretta 92?
another mag question
- Thread starter btsyshsbnd
- Start date
- Status
M2 Carbine
member
No.
The mag catch hole is in a different place.
As far as I know if the holes can be made to match, the mags will work in either gun.
The mag catch hole is in a different place.
As far as I know if the holes can be made to match, the mags will work in either gun.
btsyshsbnd
Member
- Joined
- Sep 28, 2006
- Messages
- 30
I was afraid of that, thanks
Ditchtiger
Member
mag switch
The Beretta mags catch hole is just a little lower than the Taurus's hole. So a little filing at the top of a Beretta's hole will let it work in a Taurus. But mags won't work the other way around as the case rim will be lower in the gun, unless you hold the mag in with your support hand
The Beretta mags catch hole is just a little lower than the Taurus's hole. So a little filing at the top of a Beretta's hole will let it work in a Taurus. But mags won't work the other way around as the case rim will be lower in the gun, unless you hold the mag in with your support hand
MachIVshooter
Member
If you have a Dremel they are. I have modified Beretta 92 mags to work in PT-92's, CZ/TZ-75's and Baby Eagles, as well as S&W 5906's. Sometimes a follower change is required to engage the slide catch.
However, once this is done you must hold the mag release on the Beretta 92 while inserting.
- Status
