Anyone ever used one of these?

[jhansman]

I need a new primer pocket uniformer, as the dinky one that came with my Lee set has lost its edge, and with my aging hands, it is a pain to use for more than a few cases. This on on MidwayUSA looks promising, but there are no reviews, and I've not heard of the company:

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=357633

Any feedback is appreciated.

 

[Walkalong]

Check here.

The Holland probably works fine, but I am familiar with Sinclair products and they are top notch.

 

[Farnorthdan]

Lyman tool

I use the cordless electric Lyman tool and Lyman primer pocket attachments, they work fantastic with little to no stress on the old wrist.

 

[jhansman]

Farnorthdan, can you post a link or product numbers for these tools? I can't seem to narrow down what I'd need from the Lyman site. Thanks!

 

[the_right_reverend]

Redding Primer Pocket Uniformer Tool

this one come with a adaptor for a cordless screwdriver

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=764406&t=11082005

 

[Floppy_D]

I have the one you showed, it works like a champ. If you have something you can use in a drill instead, do it... but the wooden handled one works quite well.

 

[jhansman]

Hmmm, that Redding tool was the one I started with in my quest for a new PP cleaner, but was told that tool is for removing military crimps (swaging), so I moved on. So, I'm a bit confused-is the Redding tool a good choice for general PP care, i.e., does it clean and uniform the pocket?

 

[345 DeSoto]

jhansman,
I'm in the same boat you are...hand turning gets old after a few cases. I went with a cordless screwdriver to go with my Redding primer pocket reamer. It cured the problem...

 

[jhansman]

Well, it looks like the Redding setup is the way to go. Thanks to all who replied (or will).

 

[the_right_reverend]

Redding Primer Pocket Uniformer Tool

I double checked mine the small rifle is 09105 and the large rifle is 09100
and both sets came with the the power adaptor 09110


but get a better driver then the black and decker

 

[scrat]

The little lee one is awesome.

I put it in my hand drill set the motor speed very low. Then spin away. you can do so many so quick

 

[lamazza]

I use that JHansman and it works just fine.