Anyone make a mag pouch like this?

[Detritus]

This is really a follow up to a thread I started back in December, in which I was exploring options for replacing the cloth Tuff Products 8-in-line mag pouch I've been using. In that thread someone suggested, since I like the relative compactness and bullets-out config of the 8-in-line, that I find a local maker and ask them to copy it in Kydex. Well after thinking on this for awhile, I figured I ask if anyone knew if maybe what i'm after is already available. and if not i'll look into the custom option.

so here's the feature list:

• Kydex, I know Safariland makes a piece that's real close to what i'm after in a leather like synthetic, but I'm looking for kydex
• bullets out configuration
• Five mag "slots" minimum prefer six. the logic in my head says 3-4 "normal" reloads (assuming full 32rd stage, and I shoot Single Stack BTW) + at least 1 "just in case"
• approximately one magazine width of space between each "slot" for easier access. (I currently run my 8-in-line loaded as follows 1-3-5-7,8 for this reason)
• a good solid set of belt loops, stiffeners, whatever's needed so that it doesn't flop/move around on the belt. I know this is a real "No Duh!!" feature, but this is one of the major drawbacks of my current setup. It doesn't have rigid belt loops it has a set of MOLLE straps/laces, and two Velcro loops. No matter how tight I am able to get the thing secured to the belt the fact that the attachment points are fabric allows the pouch a small but annoying amount of movement.

anyway that's my current dream sheet for a mag pouch (array), anyone know of anyone currently making something like this or close to like this?

thank you for your time and any info you care to share

 

[JTQ]

Ghost makes singles that you could line up. Single may make positioning them easier on you belt line.

http://www.benstoegerproshop.com/Ghost-360-Universal-Magazine-Pouch-SG-MAG-p/sg-mag.htm

I don't recall the specific thread you mentioned, but I suspect I recommended the SLC from Garrett Industries. http://www.giholsters.com/slmc-spring-loaded/

My "Google-fu" turned up this guy, who makes quads. He could probably increase the number, but I have no experience with his work.

http://www.christianscustomkydex.com/gallery.html

It seems as if you may have some problems with that many mags in a row on a kydex pouch with either too much or not enough bend in the kydex for your body shape.

 

[bainter1212]

I use the all-kydex singles made by Kytex Shooting Gear in Texas. No stupid cloth straps or velcro.....snaps onto your belt real tight. In fact I have a hard time removing them they fit so tight.
Another plus is, they are much cheaper than anybody else's.