I question if a 1:9" twist will stabilize an 80 grain bullet. I toyed with the idea of building a 1:8 or 1:7.7" twist .22-250, but decided on a 6mm BR instead.
I thought about doing the same thing. Then I realized that the common 243 will shoot 80gr bullets just as fast if not faster and do it without having to buy a special barrel. Plus it wil shoot a 55gr bullet at around 4000fps. And best of all it will shoot 100-105gr bullets for deer hunting.
The 243 will use a little more powder but for the savings in barrels and gunsmith work I can buy a lot of powder.
go there, and fill in the blanks. use your calipers, and measure the 80 grain (A-MAX?). This will give you an idea if you can shoot, but there is not substitute for real world experience.
I have a Remington .22-250 with a 1-14 twist. I was trying some heavier bullets and found it will not stabilize a 69 grain HPBT Sierra. It will however, handle a 70 grain RNPB from Speer. (The heavier bullet is shorter.) The 70 grain bullet is .791" long and the 69 grain bullet is .900" long.
A properly set up, fast twist .22-250 would throw a heavy bullet a fairly long way. The ballistic coefficient and the sectional density would be vastly superior to anything in the 50 - 55 grain range.
With slower powders, I could throw the 69 grain bullets at 3240 f/s - according to my chronograph. The fastest I ran the 70 grain bullets was 3100 and small change. I would think one could break 3000 f/s with an 80 grain bullet. Heck of an antelope rifle.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.