Anyone tried Prvi Partizan ammo?

Status
Not open for further replies.
Tried some in both 7.62x54 and .30-06.

Very good ammo at a reasonable price point.

Would buy the Prvi brand in any calibre I shoot if available.
 
Šestoro ljudi poginulo je u četvrtak uveče u fabrici municije "Prvi partizan" u Užicu nakon četiri eksplozije koje su odjeknule oko 21:30, potvrdio je za RTS Predrag Marić, pomoćnik ministra unutrašnjih poslova za zaštitu i spasavanje. Detonacije su se dogodile u tunelima koji se protežu ispod brda na ulazu u grad. Marić je rekao da su vatrogasno spasilačke ekipe pronašle šest tela. On je dodao da je požar u fabrici lokalizovan i da nema opasnosti od novih eksplozija. U eksplozijama je lakše povređeno 13 radnika i oni su zbrinuti u bolnici u Užicu. Uzroci eksplozije se ispituju.

http://www.krstarica.com/s/index.ph.../www.krstarica.com/cir/katalog/Mediji/Novine/

At 9:30 PM Europe time four large explosions rocked the factory in Uzicu.
Manufacturer of first partisan ( Prvi partizan) ammunition. Explosions occurred in the tunnels under the mountain at the city entrance. Rescue discover six bodies.
the fire is localized and is not a danger of more expositions. 13 workers were taken to the hospital with minor injuries.
Cause of the explosion is under investigation.

Damage from the Blast
pozar_v2.jpg
 
Prvi seemed to be harder to extract out of my K31 than did the GP11 or Hornady loads I've fed it. Decent accuracy but not as good as GP11 or the 165 gr loads from Hornady! Hope this helps!
 
I bought about 100 rds in .380 when that was all I could find. I fired every round through the LCP I had at the time and it was great. Burned nice and clean, accurate, and no jams of any kind. I don't know if it's considered good quality or not but I certainly had no glitches with it.
 
Hello everyone. Has anyone shot the Prvi Partizan PPU M855 62gr. on sale at Aimsurplus? And would it be safe to shoot in my DPMS with a 5.56 chamber and a 1/9 twist barrel? And last question, the description states "steel penetrator bullet". Does that mean it's armor piercing?

Thank you!

Miguel V.
 
My .303 Prvi has been reloaded at least five times with everything looking normal on all of the brass. 37 grains of IMR 4064 might help it endure to seven reloads?

The only bullets for reloading are 150 grain.
Experienced reloaders claim that Prvi brass is thicker and more durable than Remington.

With Serbian brass reportedly better than all-American, maybe the brass made in Lonoke, AR should be thicker. The eastern Europeans seem to understand capitalism pretty well.
 
I just shot their 223 rem in 55 gr FMJ/BT (boat tail). It is about the only affordable BT bullet in 55 gr and it cut my groups back with 30% versus 55 gr FMJ Sellier and Bellot.
Very pleased:)
 
Status
Not open for further replies.
Back
Top