Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Hey guys those of you that have put your rifle in the oven to bake out the cosmolite what temperature and how long did you do it for, and did you use something like polyurothane to cover up the rifle after the baking?
The only "baking" I have done is to wrap the stock in a few black garbage bags and set in on the dashboard of my truck on a hot day. A few hours later, remove the stock, wipe down and repeat. Not perfect, but I wasn't going to fit a rifle stock in my oven.
One of the best ways i have found to remove cosmo is to spray it with overn cleaner, let sit, rinse, repeat a time er two and its really cleans up nicely. I dont think i would any of the metal in the oven for fear of it changing the metalurgy properties.
Well i have it in the oven right now with the door open at aroun 180* i live in fl, and in the summer i have had the riffle in the car and it easily gets to around 150*, so i am not to worried about the mettal plus when i shoot it the barrel and metals around the barrel heat up more than that. O by the way the stock is the only thing in the oven i took the metal peices off.
I dont bake cosmo off in the oven only becuse I know how good my wife can shoot
I use WD40, q-tips and pipe cleaners. remove the cosmo, dip it part in boiling water for 5 minutes, spray with gun scrubber, then an over-night bath in break free. Works like a charm and I don't fear the boss.
I like baking the stock because you're not stressing the wood with powerful chemicals. Put it in your oven at it's lowest temp (usually 150-180F) and take it out every 15 minutes to wipe it down (just like .45 guy said). After about 45-60 minutes it will stop oozing out. I've done this to 3 stocks and it works perfectly...the wood finish is unchanged.
Pro-tip: make a small pan out of aluminum foil and place it under the end of the stock to collect any drippings while it's in the oven.
I always use Easy-Off oven cleaner on stocks. Just spray on, leave sit for 15 min, then spray off with hose. Do this a couple times, and wood is clean and like new(of course you have to refinish it). Don't worry about harming the wood with oven cleaner. I have done it to 6 or 7 stocks now, and none have been harmed in any way.
I only bake milsurps when the wife is out of town. Unless you have an enclosed kitchen, the smell tends to go around the house. We have a kick-ass kitchen exhaust fan that ventilates to the outside, but that only helps keep the smell and smoke down to some extent.
Oh, about the smoke, I triggered the fire alarm once or twice. It helped that, like I said, the wife was out of town.
I'd think kitchen oven is quite safe on metal unless you got something at goes to several thousand degrees F.
Try coating the stock with painters whiting (get it at a paint store), put the stock in a heavy garbage bag and leave it in hot sun or inside a closed up vehicle in the sun. This stuff draws oil and cosmoline residue out from the stock pretty well.
If you do more than one or two rifle a year, I saw a post somewhere once that used two 33 gal garbage cans, a plywood washer, and about half a dozen 100 watt lightbulbs. That way you can do your 'baking' outside and not have to worry about checking to see if you have over cooked your rifle so often. Will see if I can track down the link.
The only two links I could find, but you can get the idea. The one I saw used two cans, one inverted over the other with a plywood washer(circle with a hole cut in it for the rifle stock) between the two, and lights in both cans, just hang the stock or entire rifle from the inside of the top can, plug in and let 'cook'.
I just refinished a Colt M16A1 upper from CDNN in Brownells baking laquer. I managed to thoroughly clean the upper reciever, painted and baked the 2 halves at the same time. On the barrel, however, I only painted the front sight base. Cooking at 300 for 1 hour, the base around the barrel oozed out cosmoline for a good 20 minutes. Scented the house up better than the baking laquer! Note, wife was at work, kids were at my parents. I was awoken around 0200 when my wife got home.
"WHY DOES MY HOUSE STINK? WHAT THE #$%& DID YOU DO TO THE OVEN???
For a really soaked stock, heat and time are the only things I know of that will get it all out. If in a place where it gets hot during the day, you can deep-clean by wrapping it with paper towels- including stuffing the receiver recess and barrel channel- then putting it in a plastic bag and putting it in the sun. Or in the car or trunk, wherever it will get hot. Heat causes the grease to bleed to the surface and the towels soak it up. Do that several times, and then wash it with mineral spirits to get the surface clean.
Mineral spirits work, I've used the oven too. Seems like I set it around 150-200. Covered a cookie sheet with aluminum foil and set the stock on that to catch stuff that ran out. Also baby-sat it, wiping occasionally to keep too much from puddling up.
A few actual quotes from DSW:
"Why is there a gun in my bathtub?"
"What are you doing with the oven?"
"Where is my iron?"
She's a good sport about it all. I think I'll buy her an SKS to show her how much I love her.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.