Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Best Bullet Weight for .22-250

Discussion in 'Rifle Country' started by joed, Nov 10, 2010.

Thread Status:
Not open for further replies.
  1. joed

    joed Member

    Joined:
    Sep 17, 2009
    Messages:
    2,201
    Location:
    Ohio
    I've been reloading for a friend's rifle in .22-250 for awhile now. Actually like this cartridge so bought my own gun. What's the best weight to use for varmints?

    I have a good supply of 55 gr from the last .22-250 I owned but was wondering if I should try something lighter. I had all the supplies but never got to reload mine as I sold it. And here I am with another rifle chambered for this cartridge.

    Also have some of the Nosler Combined Tech 55 gr bullets. Anyone ever use these? Are they any good? What's the advantage of the jacket material on these?
     
  2. taliv

    taliv Moderator

    Joined:
    Oct 23, 2004
    Messages:
    22,366
    Need to know barrel twist
     
  3. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    22,844
    Bet you a quarter it is a 14" twist.
    Bet you a dollar that if it is not a 14" then it is a 12" so the company can use the same barrel blanks for .223 and .22-250.

    Optimized over about 70 years for 55 grain flatbase spitzers and great for 52 grain boattails.

    Not to say that you can't blow a lighter bullet out at higher velocity.
     
  4. brettrow

    brettrow Member

    Joined:
    Oct 21, 2010
    Messages:
    120
    I shoot 55 grain too.
     
  5. Damon555

    Damon555 Member

    Joined:
    Jul 7, 2008
    Messages:
    893
    Location:
    The south
    My personal choice is the 40 grain Vmax.....it is murder on prairie dogs.
     
  6. joed

    joed Member

    Joined:
    Sep 17, 2009
    Messages:
    2,201
    Location:
    Ohio
    The rifle is a Rem 700 SPS Varmint Stainless with 1:14 twist I believe.
     
  7. Bill B.

    Bill B. Member

    Joined:
    Jun 25, 2004
    Messages:
    961
    As far as accuracy goes the 52 grain match bullets always shot the best for me but I always used the 55 grain Hornady SX's for hunting as they were much safer shooting with livestock in the area.
     
  8. mshootnit

    mshootnit Member

    Joined:
    Feb 4, 2007
    Messages:
    2,230
    I think 55 grain would be ideal for multi purpose shooting, but for strictly coyotes I would go 50 gr Vmax or similar. Sight in dead on at 300 yds with the fastest load that shoots well.
     
  9. Rokman

    Rokman Member

    Joined:
    Apr 29, 2006
    Messages:
    1,046
    Location:
    The Lone Star State
    I shoot 50gr. Vmax, 52gr. Amax, 55gr. Nosler btips and 55gr. Sierra Gamekings out of my Ruger 77MKII with a 1:14 twist barrel with great accuracy. The Combined Technology bullets shoud shoot and work just fine. I think the coating on that bullet is to keep the copper fouling down. I have shot many CT bullets out of a .25-06 and they were very accurate for me.

    The .22-250 is very fun to shoot and has been pretty easy for me to handload for. I have had great results with H380 and RL15 and pretyy good results with Varget. Good luck.
     
  10. 788Ham

    788Ham Member

    Joined:
    Sep 24, 2010
    Messages:
    3,206
    Location:
    Hills west of Denver
    I've shot Hornady 52 and 53 gr HP's in my 22-250 Rem, 700BDL. The 52 BTHP's shoot better for me, 1-12. I've smacked Pd's out to 500 yds with these loads, 53's if its a tad windy. Never have liked the plastic tips...... JMHO
     
  11. HOOfan_1

    HOOfan_1 Member

    Joined:
    Aug 11, 2010
    Messages:
    4,698
    Location:
    Virginia
    Shoot 52 Grain Sierra Matchkings out of my dad's .225 Winchester for groundhogs. Plan to try them in my .22-250 too. Not exactly a hunting bullet, but if you are aiming for the head, it doesn't matter. Heck with a 3800+ FPS bullet hitting a 10 pound groundhog anything in the torso is likely to kill it almost instantly anyway.
     
  12. joed

    joed Member

    Joined:
    Sep 17, 2009
    Messages:
    2,201
    Location:
    Ohio
    Thanks for all the tips. I guess I'll start with the 55 gr Noslers and see how they do. Sounds like anything between 50 gr and 55 gr is the ticket.
     
  13. joed

    joed Member

    Joined:
    Sep 17, 2009
    Messages:
    2,201
    Location:
    Ohio
    788Ham, curious what you don't like about the plastic tips. I've never used them as years ago I stocked up on .25 cal bullets with lead tips and still have a good supply left.

    But I never stocked any .22 cal bullets so this will be my first experience with plastic tips.
     
  14. NCsmitty

    NCsmitty Member

    Joined:
    Jun 29, 2008
    Messages:
    5,325
    Location:
    North Carolina
    Try the Hornady 52gr A-Max, that's what works for me in my 22-250.



    NCsmitty
     
  15. kaferhaus

    kaferhaus Member

    Joined:
    Nov 26, 2004
    Messages:
    739
    Location:
    Mobile, Alabama
    just be aware that the length of the 55gr Nosler BTs is right at the edge of what a 14T will stabilize. Some 14T guns shoot them very well and others will keyhole them.

    FB bullets are usually more accurate out to 300yds or so. No real advantage to a boat tail until you get out there quite a ways.
     
  16. joed

    joed Member

    Joined:
    Sep 17, 2009
    Messages:
    2,201
    Location:
    Ohio
    Looks like I got a lot of input on bullets, thanks for the replys.

    Now, how about powder? I've used H380 in a friends .22-250 but have been wondering there are better choices. Have heard that H380 is temperature sensative, is it?
     
  17. NCsmitty

    NCsmitty Member

    Joined:
    Jun 29, 2008
    Messages:
    5,325
    Location:
    North Carolina
    It is not listed as an Extreme Powder, but IMR 8208 XBR, along with other powders, are rated as not temp sensitive, and give great ballistics.
    What you use will be up to you and your rifle.



    NCsmitty
     
  18. Shurshot

    Shurshot Member

    Joined:
    Nov 5, 2010
    Messages:
    109
    Location:
    Ohio
    Winchester 55 grain Pointed Soft Points make my Ruger MK77 a tack driver whereas Federal 55 grain HI-Shok Soft Point shoot horrible with the best being about a 4" group in the same gun. Bottom line is you are just going to have to test different types. Don't buy a large supply of ammo until you learn which type of ammo that might be for your particular gun. I have a couple hundred rounds of the Federal that I will probably never use unless I end up getting another 22-250 that will shoot it good.
     
Thread Status:
Not open for further replies.

Share This Page