CAUTION: The following post includes loading data beyond currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the writer, The High Road, nor the staff of THR assume any liability for any damage or injury resulting from use of this information.
My opinions on the problems with 7mmRemMag:
1) The cartridge should have been SAAMI registered at 71,000 psi, not 61,000 psi.
2) Published loads for the 7mmRM are mostly way below 61,000 psi.
3) The cartridge chamber should have been SAAMI registered at 0.215" headspace from breech face to the end of the belt, not 0.220", because all the brass is less than 0.215".
So what do I do with the 7mmRM?
1 &2) I hand load to 71,000 psi.
The book load for 162 gr H4350 may be 58 gr, but I am hunting with 67 gr.
3) I headspace the rifles I build for myself at 0.215".