I run these with 4.3 gr. WST for a 130+ PF out of a 5" 1911.
Great range ammo-2" @ 25 yds.
Yes, the blue does come off on your fingers, but comes off with soap.
Just finished running the sample pack with Power Pistol through my Glock 17 (OEM barrel) and they ran great. Will be ordering a few thousand of these soon.
As others have said, a little blue on the fingers but it comes right off.
I just loaded some last night with 4.4 gr of IMR SR7625 at 1.125". Few things that I noticed, they seem a bit wider at the base as compared to extreme 124gr round nose. They very slick. I pulled two of them to inspect the coating after seating and taper crimping. I use a collet puller vs the hammer style puller. I had to squeeze the bullet quite a bit to pull it out. As noted in previous post there is a very light blue residue on fingers after handling. I did not notice any blue residue on or around the press with the exception of the seating stem on the bullet seating die.
I shoot them. They work great, but I do have a few more of these than with other brands that end up with a round not fitting a case gauge. Overall though, not really a problem.
Well just got back from the range fired 100 of the blue bullets in 125gr RN. Gun glock 19 functioned flawlessly. Cleaned the gun after coming home, no sign of leading or any sort of blue residue. Accuracy wise I did not see any difference between these an extreme plated bullets.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.