Last Saturday I picked up my new custom 1911 government model pistol. It is the final handgun in a matched set of 1911's built for me by Ed Cameron of Glendale, Arizona.
Photos of both pistols are on my photo site:
http://groups.msn.com/ShepsansCollection/_albumlist.msnw
Double click album title to enter it and double click photo to enlarge it.
Following is my component list:
The Commander is built on a Colt #04691 Series 80 M1991A1 platform.
The Government is built on a Colt #01991 Series 80 M1991A1 platform.
Here is a list of components for each:
Frame: High cut
Slide to Frame Fit: Match grade
Checkering: 30 Ipi checkering on front strap of frame
Serrations: Front cocking on side of slide
French cut lines: Top of slide
Flat and serrated: Top of slide
Ball end mill cuts: Font of slide
Frame and Slide: Concealed carry bevels with no sharp edges
Barrel & Bushing: Kart 45 ACP National Match (n/m)
Barrel Link: Wilson
Front Sight: Cameron fiber optic
Rear Sight: Novak low mount
Firing Pin: Colt
Firing Pin Stop: EGW
Extractor: Wilson
Grip Safety: Ed Brown memory grip
Thumb Safety: Ed Brown single side thumb safety
Slide Stop: EGW
Pin Kit: Ed Brown 1911
Ejector: Colt
Hammer: Wilson Ultralite Hammer
Hard Sear: STI
Disconnector: Colt
Sear: STI
Main Spring Housing: Ed Brown 30 Ipi main spring housing
Springs: Wolff
Magazine Catch: Wilson extended magazine catch
Trigger: STI titanium long trigger
Trigger job: @ 3.5 Ibs
Grips: Alumagrips (MS) engraved
Grip Screws: Allen head
Finish: Cameron Matte Blue
Roll Mark: Colt New Roll Mark
Photos of both pistols are on my photo site:
http://groups.msn.com/ShepsansCollection/_albumlist.msnw
Double click album title to enter it and double click photo to enlarge it.
Following is my component list:
The Commander is built on a Colt #04691 Series 80 M1991A1 platform.
The Government is built on a Colt #01991 Series 80 M1991A1 platform.
Here is a list of components for each:
Frame: High cut
Slide to Frame Fit: Match grade
Checkering: 30 Ipi checkering on front strap of frame
Serrations: Front cocking on side of slide
French cut lines: Top of slide
Flat and serrated: Top of slide
Ball end mill cuts: Font of slide
Frame and Slide: Concealed carry bevels with no sharp edges
Barrel & Bushing: Kart 45 ACP National Match (n/m)
Barrel Link: Wilson
Front Sight: Cameron fiber optic
Rear Sight: Novak low mount
Firing Pin: Colt
Firing Pin Stop: EGW
Extractor: Wilson
Grip Safety: Ed Brown memory grip
Thumb Safety: Ed Brown single side thumb safety
Slide Stop: EGW
Pin Kit: Ed Brown 1911
Ejector: Colt
Hammer: Wilson Ultralite Hammer
Hard Sear: STI
Disconnector: Colt
Sear: STI
Main Spring Housing: Ed Brown 30 Ipi main spring housing
Springs: Wolff
Magazine Catch: Wilson extended magazine catch
Trigger: STI titanium long trigger
Trigger job: @ 3.5 Ibs
Grips: Alumagrips (MS) engraved
Grip Screws: Allen head
Finish: Cameron Matte Blue
Roll Mark: Colt New Roll Mark