custom 1911

[horsemen61]

Hello does anybody no if there is a custom 1911 pistolsmith who will do this job

Package modifications and parts include:

Caspian slide, carbon Commander or Government
Frame to slide fit
Best quality trigger job, using proprietary components and choice of short, medium, or long trigger
Fitted Wilson beavertail gripsafety
Frontstrap hand checkered @ 30 lpi
Flat top & serrate slide @ 50 lpi w/ point pattern
Heinie sight system, black, w/ .140 notch
Polished slide flats
Wolff mainspring
Wolff sear spring
Wolff recoil spring
Wolff firing pin return spring
Ed Brown recoil spring guide
Ed Brown recoil spring plug
EGW firing pin stop
Ed Brown Firing pin
Ed Brown hammer strut
Stock screws
Stock screw bushings
Wilson ejector
Wilson extractor
Barstock plunger tube
Nowlin magazine catch assembly
Grizzly Custom etch on dust cover
Steel mainspring housing hand checkered @ 30 lpi to match frontstrap
Hand-filed beveled magazine well
Ed Brown Pin set/rebuild kit
Schuemann Barrel
EGW barrel bushing
Dehorn complete pistol
Ed Brown thumb safety
Custom smooth hardwood stocks
7-round magazine
Pistol Rug
Test fire & zero
Blast, blue & polish all metal as required
Reassembly & final fit

here is the website www. Grizzly custom guns.com that is exatcly what i want it to look like in commander 10mm they quit making it

 

[rcmodel]

Grizzly Custom etch on dust cover

Well, my first thought is, if you want it to say Grizzly Custom on it, I'd get Grizzly Custom to build it.

I think they might take exception to someone else using their trademarked name on a fake.

BTW: Your link don't work!

Also BTW:
If I was going to spend anywhere near that much money, I'd just buy an Ed Brown pistol and be done with it.

rc

 

[Skylerbone]

If you want a custom 1911 shoot Jeremy an email or PM him here.

Email: Reid Pistolsmithing, LLC.
[email protected]

THR user name: Jeremy Reid

He's studied with the best, cuts no corners, has great connections and it will look great while being dependable. Can't say on the bear logo but you can always ask, Trade Marks is Trade Marked after all.

 

[horsemen61]

Dan Wesson will make what I want

 

[AZAndy]

You're going to deny yourself the fun of doing it yourself? Where's your sense of adventure? Other than the bluing, checkering, and milling for sights, that's all DIY-able stuff-- but you might want a copy of the Kuhnhausen manual.

 

[Zerodefect]

A pic would help us visualize it.

Like others have said, I'm sure someone has something close, then you just send out out to get dehorned.

 

[627PCFan]

https://forums.1911forum.com/forumdisplay.php?f=48 is your friend. Plenty of gunsmiths here who only do Caspian builds. Go to here and start reviewing their work.
https://forums.1911forum.com/showthread.php?t=141475

 

[Olympus]

There is also Fusion Firearms to contact.

 

[WC145]

Dan Wesson will make what I want

You waited 5+ years to reply to your own thread and haven't bought the gun yet? Guess you need to hurry up and call Dan Wesson, though I've not heard anything about them doing that kind of custom work.

 

[surjimmy]

Don Williams at Action Works does outstanding work.

 

[justin22885]

geeze.. resurrecting a thread thats been dead 5 years, took you a while to figure out what you wanted