I am a rookie at reloading and need some help with excessive neck stretch after full length resizing. This is LC processed brass, (from RVO) that I trimmed to 0.005 under max length, loaded and shot. After resizing, almost every case neck is longer than the case gauge, some worse than others. I am using an old Pacific/Hornady die. I have also tried lubing the inside of the neck with Hornady One Shot, mica, graphite and RCBS Case Lube 2. I also polished the expander.
I am considering 2 options:
-buy a Lee collet die to size the neck after full length resizing.
- buy a new die set, Hornady New Dimension or ?
Any help will be greatly appreciated.
Ray
I am considering 2 options:
-buy a Lee collet die to size the neck after full length resizing.
- buy a new die set, Hornady New Dimension or ?
Any help will be greatly appreciated.
Ray